The 20 diy garden fountain plans. 1. tabletop fountain. check instructions here. tools: drill machine, hacksaw. supplies: pvc pipe 20mm ( 18 cm x 2 nos & 16 cm x 1 nos),soldering iron 0, glue gun, hose 4mm, elbow, tee, styrofoam, wooden pot, pebbles. submersible pump 15 watt, buddha statue, lucky bamboo. Drill a .5 inch hole through the side of the stock tank, 1 inch above the top of the installed deck. this is the over fill drain hole. do not skip this step. now fill in around your rock with the river rock or pebbles right to the top of the tank rim. fill the tank with water until the water starts to come out of the drain hole you made in step.
Cut off the rim from the pump pail and cut and fold down a 1 1 2 in. wide x 2 in. flap at the top for the water line and electrical cable. use a spade bit or a twist bit to drill 1 2 in. drain holes in all the pails. family handyman. step 10. Cherrywood charmer custom water feature. native edge landscape. beautiful 3 pump concrete fountain with wooden frame that recirculates through a bed of river rock. design ideas for a mid sized transitional partial sun backyard river rock and wood fence water fountain landscape in austin for summer. The carrera oval fountain is a stunning centerpiece for any outdoor space. its sleek oval shape and durable cast stone construction make it both visually pleasing and long lasting. this elegant water feature showcases a three tiered design with wide and low basins that create a soothing sound of cascading water. Prepping the rock. now that you have drilled the rock you need to have a way for water to flow through it. use a 1” barbed fitting and pound it in with a hammer. the barbs on the fitting will keep it in place. now use a 1” hose and shove it on the other end of the barbed connector. no need for any clamps.
Comments are closed.