2013 Ford F150 5 0 Horsepower And Torque Power horsepower. 360 hp @ 5500 rpm. torque. 380 ft lb @ 4250 rpm. mpg (economy) 14 city 19 highway. curb weight. 4,707 to 5,639 lbs. The 5.0l coyote engine block main bearings have 3 sets of fasteners that are used to ensure the bearings stay in place. the first set of fasteners are a series of bolts that screw down vertically into the inwards portion of the bearing caps. these fasteners should be tightened down to 10 ft lbs and then 48 ft lbs and finally a 90 degree turn.
F 16 Raptor 2013 f150 5.0l & 6.2l v8 performance parts while the output of the 5.0l coyote v8 and 6.2l boss v8s aren't anything to just sneeze at and brush off, there's a good amount of power and torque that ford left on the table that's easily in reach with a few basic bolt on performance parts and pcm tuning. Ford f150 13 (2015 2020) torque spec settings. kevauto, cc by sa 4.0, via wikimedia commons. below you'll find the tightening torques for the ford f150 13 in both nm and ft lbs. the first table contains the most used torque settings. the tables after it contain all torque spec values i could find. So what is the difference in the 2011 ford mustang 5.0 and the 2011 ford f150 5.0 i was looking at all the specs and all the specs are the same they keep saying that the f150 is 360 hp and the mustang is 412 to 420 hp. i did see that there was a couple of things that was different but it didn’t look like it would make that much difference. The 2013 f 150 has four available engines, and each comes standard with a six speed automatic transmission. the base engine is a 302 horsepower, 3.7 liter v6. there are two optional v8s, a 5.0 liter with 360 horsepower and 380 pound feet of torque and a 6.2 liter with 411 horsepower and 434 pound feet of torque.
Comments are closed.