7 Ways To Fix Dometic Refrigerator Igniter Not Working Camper Upgrade

7 Ways To Fix Dometic Refrigerator Igniter Not Working Camper Upgrade To fix this problem, you need to access the gas valves of the refrigerator and put them down for a few hours. after this break, turn on the gas valves, and the pilot light will stay on. as a result, it will trigger the burners and igniter. 7. faulty burners. Be thorough when working on the gas line and make sure it is in the right condition for the fridge to work. it is important to look at this when it comes to a dometic rv product such as this. final thoughts. it’s important to go through this guide when figuring out the main issue with the dometic fridge igniter not clicking.

7 Ways To Fix Dometic Refrigerator Igniter Not Working Camper Upgrade Posts: 83. dometic rm2510 igniter stopped working. i rolled out our old camper this spring and got all systems checked out and working before leaving on an extended trip. we travel with the refrigerator operating on gas and switch to ac when camped. the refrigerator worked well on gas the first day and ignited properly the second morning. Removing the fridge is the easiest way but it can be done in place with a lot of cursing. there are two wires that need to be removed, one on the end and one on the side. the side one is a spade terminal. the ignitor itself is held in place with a large nut. best take the old one with you for comparison. Dometic rm2852 troubleshooting. 1. the dometic rm2852 fridge not getting cold. one of the most commonly reported problems with this fridge is struggling to get the fridge cold. this can be super stressful as you need your fridge to be cold to keep your food fresh. without your fridge getting cold, the food inside can spoil and that is wasted money. How to fix dometic camper fridge not working? 1. check wiring. the first thing you should be checking on is the wiring and you will need to make sure that the wiring is fine. so, look out for any apparently broken bits or some sharp bends that might be causing you to have the issue. if there are any such things on the wiring, you will need to.