Ac Drain Line Clogged Find Out Why And How To Fix ођ Turn off the ac’s power: working with water and electricity can be a dangerous combination. shut off the air conditioner’s power at the breaker before you get started. move the cap from the drain line: look for a cap at the top of the line. remove the cap so you can take a better look at the clog. Flush the drain line regularly: flushing the drain line with water and a cup of bleach is an easy method to clean the sides of the drain line. clean the ac unit thoroughly: cleaning out the evaporator coil is another way to ensure that dirt and grime never make it to the condensate drain.
юааacюаб Condensate юааdrainюаб юааlineюаб юааcloggedюаб Hereтащs What To Do Hvac Training Shop To unclog a condensate, or drain line, the hvac technician will use a vacuum, wet vac, or simple snake to remove the clog. similar to if you were unclogging a sink, when the hvac technician unclogs your drain line, they should pull out a lump of, essentially, gunk that was causing the clog. 1. check to see how bad the clog is. take a look outside where the drain line goes and see if there is any minor blockage. sometimes, removing the clog is an easy fix that can be removed outside. also, take a look inside the drain pan to see if the clog is in the line that connects to the drain pan. 2. Cut the drain line. add a shut off valve at the air handler or furnace side. turn it to the off position. add a t on the opposite side, and insert a garden hose fitting into the top of the t. screw into the garden hose fitting a ¾” to ½” adapter, and screw into the adapter a short ½” threaded nipple. 5. pour 1 cup (236.5 ml) of bleach into the hole to kill the mold and mildew. measure out 1 cup (236.5 ml) of bleach into a measuring cup with a pouring spout. pour it into the access hole and let it drain out the other side. [8] use a funnel to help you get all the bleach into the drain line if it is easier. 6.
How To Clean A Clogged Air Conditioner Drain Line The Indoor Haven Cut the drain line. add a shut off valve at the air handler or furnace side. turn it to the off position. add a t on the opposite side, and insert a garden hose fitting into the top of the t. screw into the garden hose fitting a ¾” to ½” adapter, and screw into the adapter a short ½” threaded nipple. 5. pour 1 cup (236.5 ml) of bleach into the hole to kill the mold and mildew. measure out 1 cup (236.5 ml) of bleach into a measuring cup with a pouring spout. pour it into the access hole and let it drain out the other side. [8] use a funnel to help you get all the bleach into the drain line if it is easier. 6. Prepare a mixture of water and vinegar (a 50 50 mix is typically effective) to flush the drain line. this solution helps dissolve any remaining buildup and has natural disinfecting properties to prevent the growth of mold and algae. flushing the line: pour the vinegar and water solution into the drain line. Step 2 check the drain pan. one of the first things the technician will do is locate the drain pain and check for standing water. if standing water is present, it can either be soaked up with rags or removed with a wet vac. the dry condensate pan should be thoroughly cleaned to help prevent the growth of mold.
Comments are closed.