Add Bluetooth To Your Old Car Stereo 11 Steps Instructables Step 3: making the dongle smaller. the dongle is pretty damn small, but the 3.5mm connector takes most of the height of the dongle. since we're not using it, removing it is very easy. just heat the surface mount pads with a soldering iron while using some metallic tool to pry the connector at the same time you heat the pad. Step 1: first step. make sure your bluetooth and your stereo already works! you must disassembly your stereo, just, put off every screw you can see. and then, pull of the cover. this step may be all way different which every stereo, so, you must find the way to disassembly until you get to the pcb.
Add Bluetooth To Your Old Car Stereo 11 Steps Instructables Step 6: connect and hide everything. now it's time to join the 4 wires of the button, and to insulate them with two pieces of heat shrink tubing. than connect the bluetooth audio receiver to the battery through our modified usb cable, and put everything in the radio hole. Hook the volume knob’s wires up to the middle two pins of the switch, and hook the original stereo feed up to a pair of pins on one side. you can then wire in your new aux cord or bluetooth. 3 ways to add bluetooth to any car. watch on. one of the best ways to add bluetooth to your vehicle is by getting an fm transmitter. it comes in handy when your car’s radio doesn’t have an auxiliary input. the fm transmitter broadcasts audio over an open fm radio frequency, but you have to tune your stereo to the right frequency so that you. By and large, the easiest and most common way to add bluetooth to a vehicle's radio is by using a bluetooth receiver. with a bluetooth receiver, you pair your phone to the receiver and stream.
Comments are closed.