Ak Barrel Threading Help Ak Rifles So i am measuring the barrel the barrel on my mak90 for threading and i’m getting .54 thousandths (13.9mm) i’m wondering if that will still thread 14x1 lh or am i going to have to turn it down to .50 thousandths (12.8mm) i’ve read that if it’s around if not approximately .55 (14.2mm) than it’s fine to thread 14x1 can anyone verify. M. micmacman. 1615 posts · joined 2007. #5 · mar 30, 2021. when i did mine you couldnt get a greased bb up my ass with a 10 lb maul hammer , i finally got the last piece of the puzzle for the bayo folder conversion , i will do the last couple turns before pressing the new sight base on. for years i used the "mellow" lock tight to keep the nut.
How To Remove An Ak Barrel In Less Than 10 Minutes Ronin S Grips This provides a "spud" that goes down the barrel and forces your die to be dead square when you start your thread. please spend the money for one. i see gundoc19 pointed you to this on the brownell's website just be sure that the tat you are getting is for a 5.45x39. I have no problems with the threading, its just getting them apart and back together that i don't have the proper tools for. i dont have an example of an sks to measure but in the case of an ak i think the barrel od at the muzzle is 14mm. 14mm is aprox .551" so you wont be able to re thread to .625"x24 tpi. perhaps a thread adapter would work. Going big on the ak means we have a lot of explaining to do when it comes to the platform. one of the most common questions we get is "what is the thread pitch on my ak 47?" above is our easy guide to the thread pitch for our ak rifle lineup. enjoy! and feel free to share. ak thread pitch. m14 x 1 lh. gf3; gf4; gf5; ak e; m24 x 1.5 rh. ak 103. 14. is it possible to restore threading to a damaged ak 47 barrel? restoring damaged threading on an ak 47 barrel is feasible, but it requires expertise and professional gunsmithing skills to ensure proper functionality and safety. 15. can i legally import an ak 47 with a threaded barrel? the legality of importing an ak 47 with a threaded.
Comments are closed.