Akm Barrel Pin Hole Youtube I show how i drill an ak barrel pin in this video with hand tools. i also show how i use my mill, which is way easier. if all you have is hand tools, get a. The barrel had already been drilled and pinned elsewhere so i had to headspace and then measure back and tryand line up the old with the virgin. i must of measured 20 times and layed it out at least 5. i bought an oversized pin from akbuilder and then used an endmill to cut a semi new barrel pin hole and then press the new pin in place.
Akm Barrel Pin Hole Youtube The "after" video of drilling and reaming the barrel pin hole. We pre drill the barrel pin hole so you are able to use that as a guide when pressing your barrel back in. go no go gauges must then be used to verify headspace before fully installing your barrel pin. your kit is 100% head spaced correct out of the box. we perform a series of checks across several team members prior to every order shipping out. This block is the first piece to be added to a new barrel. for most rifle designs, the receiver is considered the foundation of the gun. however, in the case of the ak 47, it’s the front. Insert the trunnion and tighten the knob so it can’t move. move your drill table around to line the drill bit up with the hole in the trunnion. slide the receiver over the trunnion. lower the drill and it will go in the exact same location as the trunnion hole you lined up on. the front trunnion is being held securely by the fixture.
Comments are closed.