Pin the folded under part (see picture). then sew. now you have the part where your wipes case will fit! for the elastic, put one edge 4 1 2″ away from the straight edge in the center of the pad. pin it. now fold the elastic over itself and pin it so the ends are 3 1 2″ away from each other. sew the folded under parts. Super simple diy changing pad. easy to make for your own baby, or as a gift! i used this pattern with my daughter, and have also made some for friends. compa.
Now comes the last portion, adding the velcro closure. to do this i first made a double sided piece of (8″x15″ that you will fold in half) 4″ wide by 15″ long, sew leaving one opening to fold inside out, close side and topstitch, finally add the velcro and attach to the cover like the illustration shows. you are all done!. Holach!how to sew a changing pad.in this video i will show you how to sew a changing pad with a pocket for diapers and wipes. it is a slow paced tutorial for. Hey guys!!!we all know how gross public changing tables are, so this changing pad will come in suuuupperrr handy for your babies (or even as a gift for someo. Head to the sewing machine and straight stitch around the edge of the changing pad leaving a 4” opening on one side for turning. use a 1 2 inch seam allowance and remember to backstitch at the beginning and end. since the mat's ends are curved, we’ll need to notch the curves before turning the right side out.
Hey guys!!!we all know how gross public changing tables are, so this changing pad will come in suuuupperrr handy for your babies (or even as a gift for someo. Head to the sewing machine and straight stitch around the edge of the changing pad leaving a 4” opening on one side for turning. use a 1 2 inch seam allowance and remember to backstitch at the beginning and end. since the mat's ends are curved, we’ll need to notch the curves before turning the right side out. Trim the metal clasp off the elastic. turn out. press the outside of the mat, the side without the vinyl. be careful not to touch the vinyl with your iron. fold in the bottom raw edge a 1 2" and pin. topstitch with a 1 8" seam, and continue to add a decorative topstitch all the way around your mat. Curve the corners by using a round edge object and tracing with a fabric marker and trimming. starting in the middle of one straight edge sew around all edges leaving a 4 inch opening. flip the changing pad right side out so that the rip stop is showing and the back fabric is showing on the other side with the terry cloth sandwiched in between.
Trim the metal clasp off the elastic. turn out. press the outside of the mat, the side without the vinyl. be careful not to touch the vinyl with your iron. fold in the bottom raw edge a 1 2" and pin. topstitch with a 1 8" seam, and continue to add a decorative topstitch all the way around your mat. Curve the corners by using a round edge object and tracing with a fabric marker and trimming. starting in the middle of one straight edge sew around all edges leaving a 4 inch opening. flip the changing pad right side out so that the rip stop is showing and the back fabric is showing on the other side with the terry cloth sandwiched in between.
Comments are closed.