Computer Networking Hardware How To Connect 2 Computers With A Hub
![Network hardware What Is A hub At Alanjortega Blog Network hardware What Is A hub At Alanjortega Blog](https://bostcdn.bostinnovation.com/1662845265687.jpg)
Network Hardware What Is A Hub At Alanjortega Blog How to connect 2 computers with a hub. part of the series: computer networking & hardware. connecting two computers together with a hub can easily be done by. Hub in networking plays a vital role in data transmission and broadcasting. a hub is a hardware device used at the physical layer to connect multiple devices in the network. hubs are widely used to connect lans. a hub has multiple ports. unlike a switch, a hub cannot filter the data, i.e. it cannot identify the destination of the packet, so it broa.
![Network Devices How Hubs And Switches Work And How To Secure Them Network Devices How Hubs And Switches Work And How To Secure Them](https://www.freecodecamp.org/news/content/images/2022/10/image-182.png)
Network Devices How Hubs And Switches Work And How To Secure Them Connecting two computers together with a hub can easily be done by plugging in a network cable to each computer and attaching those cables to the hub. allow. Step 2: on opening cisco packet tracer, click on end devices from bottom left icon menus, add four pcs and a hub into the screen of the simulator. step 3: connect all pcs and hub with copper straight cable by selecting it through the cables menu from the bottom left menus in the simulator. green signal in the wire shows they’re ready to. A hub is a hardware device used at the physical layer to connect multiple devices in the network. hubs are widely used to connect lans. a hub has multiple ports. unlike a switch, a hub cannot filter the data, i.e. it cannot identify the destination of the packet, so it broadcasts or sends the message to each port. The hub simply takes the pulse it receives and multiplies it – that is, sends it to all other ports. for example, if a sends a frame to b, the hub will send this frame to b, c and d – all ports except a’s port. the hub doesn’t understand ethernet, and doesn’t know anything about mac addresses.
Comments are closed.