Cruising Yacht Sailing With A Storm Jib In The Tasman Sea On Passage

How To Sail Safely Through A Storm North Sails 2 data points: with a 6.9 square meter storm jib, and 7.9 square meter trysail, my 34 foot, 7 ton boat is fully powered at 30 knots true wind (boat is more tender than most other boats). with a 6.9 square meter storm jib only (no other sails), the boat is fully powered in about 45 knots wind . Typically, storm sails are buried in the depths of a locker or under a bunk, leaving the more accessible space for other items deemed more important. this is a mistake: nothing is more important than the safety of the boat and crew. so when you’re on passage, your storm sails need to be easy to locate and ready to use.

Cruising Yacht Sailing With A Storm Jib In The Tasman Sea On Passage June 7th, 2022. from january 15 25, 2020, katie m ii sailed from sydney, australia to picton, new zealand across the challenging tasman sea. first mate, angela, opted to take the 747 on this one, but no matter – a significant single handed trip had always been on my bucket list! you can generally get a better wind angle by sailing from. The storm jib is a powerful sail that plays a crucial role in rough waters. whether facing extreme weather conditions, strong winds, heavy seas, or emergency situations, the storm jib provides increased safety, better control, enhanced maneuverability, and reduced stress on the rigging. The silversea captain’s tips for crossing the tasman sea. i sat down with captain zanello and asked him some questions about the tasman crossing. here’s what i learned… 1 the crossing will always have bigger swells between the south island and australia than the north island and australia as the big sea comes from the southern ocean. if. The storm jib can be used in a variety of heavy weather conditions, including: upwind sailing: when sailing upwind in heavy weather, the storm jib can help to balance the boat and reduce heeling by providing additional drive and reducing drag. trim the storm jib for optimal performance by adjusting the sheet tension and halyard tension as needed.