Diaper Clutch Tutorial Sewtorial More tips for sewing vinyl here. stitch the bias tape close to the edge, enclosing the side edges of the pockets. to make the handle, fold the handle piece wrong sides together, matching long edges. press. open. press the short edges 1 2″ to the wrong side. fold each long raw edge toward the center crease mark you made and press again, then. Years ago dads may have escaped from diaper duty, but modern dads are expected to change their fair share of dirty diapers. melissa from blank slate patterns and melly sews shows how to make a diaper clutch that dads won’t be ashamed to carry. i’m pretty sure that moms would appreciate its practical features, too.
Diaper Clutch Tutorial Diaper Clutch Diaper Clutch Tuto Turn the lining fabric right side out and put it inside the outside fabric pouch so that right sides are matched up together. pin around the flap and inside edges. starting from about 1.5" from the right seam stitch the lining and front fabrics together around the top of the front of the bag and around the flap edge. This cute diaper clutch pattern is easy to sew, great for boys or girls and is super handy for mom (or dad) to carry in the diaper bag. the diaper clutch easily fits several diapers along with a pack of wipes for easy grab and go for diaper changes. what you'll need: 1 4 yard fabric #1; 1 4 yard fabric #2; velcro; diaper and wipes holder. The leftover piece is your front piece. fold your fabric and lay the pattern on the fold so that the straight edge is on the folded part. cut out 1 front and 1 back piece in each fabric for a total of 4 pieces. pin your velcro (about a one inch piece) in place. one piece goes on the front part of the main fabric. Measure down 1.5” from the top of the 12” main fabric rectangle, and 2.25” in from the side. place your rough velcro strip here and pin. on the 15” piece of lining fabric, measure down 1” and 2.25” from the side and place the soft velcro strip here and pin. simply stitch around each piece of velcro. the velcro will give you a nice.
Diaper Clutch Diy Diaper Clutch Diy Clutch Diaper The leftover piece is your front piece. fold your fabric and lay the pattern on the fold so that the straight edge is on the folded part. cut out 1 front and 1 back piece in each fabric for a total of 4 pieces. pin your velcro (about a one inch piece) in place. one piece goes on the front part of the main fabric. Measure down 1.5” from the top of the 12” main fabric rectangle, and 2.25” in from the side. place your rough velcro strip here and pin. on the 15” piece of lining fabric, measure down 1” and 2.25” from the side and place the soft velcro strip here and pin. simply stitch around each piece of velcro. the velcro will give you a nice. Sew along with us as we make the cleanup clutch for that special expectant momma. don’t have a need for a diaper clutch? it also makes an excellent first aid. Diy diaper clutch tutorial. step 1: wash, dry, iron, and cut your fabric. you will need to make the following cuts . outside fabric 21 in x 13 in, lining fabric 21 in x 13 in, 2.5 in x 13 in, 2.5 in x 3 in, 2 in x 32 in. interfacing fabric 21 in x 13 in, 2.5 in x 13 in, 2.5 in x 3 in. > step 2: make the long and short wrist straps.
Make Your Own Diaper Clutch So Much Cuter Than A Ziplock Sew along with us as we make the cleanup clutch for that special expectant momma. don’t have a need for a diaper clutch? it also makes an excellent first aid. Diy diaper clutch tutorial. step 1: wash, dry, iron, and cut your fabric. you will need to make the following cuts . outside fabric 21 in x 13 in, lining fabric 21 in x 13 in, 2.5 in x 13 in, 2.5 in x 3 in, 2 in x 32 in. interfacing fabric 21 in x 13 in, 2.5 in x 13 in, 2.5 in x 3 in. > step 2: make the long and short wrist straps.
Comments are closed.