Daikin Air Conditioner Manual Symbols My Bios The ventilation air purifying symbol is displayed when a heat reclaim ventilator is connected. these icons (energy reclaim and bypass) indicate the current ventilation mode (heat reclaim ventilator only). the air purifying icon indicates that the air purifying unit (optional accessory) is in operation. the key symbol indicates that the key lock. Sure to hand over this operation manual to the new user. warning in order to avoid electric shock, fire or injury, or if you detect any abnormality such as smell of fire, turn off power and call your dealer for instructions. ask your dealer for installation of the air conditioner. incomplete installation performed by yourself may.
Daikin Air Conditioning Symbols Press the operation mode selector button to the indoor unit that you wish to designate as the mas ter remote controller. then designation is completed. this indoor unit is designated as the master remote controller and the display showing “ ” vanishes. to change settings, repeat steps. 1 and 2 . T, squeeze it well and wipe the pane. clean. then wipe it with another dry cloth.dismantling of the unit, disposal of the refrigerant, oil, and additional parts, should be done in accordance with the rel. ant local, state, and national regulations.operate the air conditioner or heat pump in a suficiently ven. Press and hold this button for 2 seconds or more and for each half second held, the tenth place numeral will increase by 1. while is blinking, press the clock button again to accept and keep the setting. after the unit powered on, 12:00 is the default setting. the symbol usually indicates the current time. Before operating an air conditioner or heat pump. make sure that the unit operates properly during the startup operation. instruct the user on how to operate and maintain the unit. inform users that they should store this operation manual with the installation manual for future reference. meanings of danger, warning, caution, and note symbols:.
Daikin Air Conditioning Symbols Press and hold this button for 2 seconds or more and for each half second held, the tenth place numeral will increase by 1. while is blinking, press the clock button again to accept and keep the setting. after the unit powered on, 12:00 is the default setting. the symbol usually indicates the current time. Before operating an air conditioner or heat pump. make sure that the unit operates properly during the startup operation. instruct the user on how to operate and maintain the unit. inform users that they should store this operation manual with the installation manual for future reference. meanings of danger, warning, caution, and note symbols:. 2 1 vacuum dusts, and soak in lukewarm water or water for about 10 to 15 minutes if dirt is heavy. 2 2 after washing, shake off remaining water and dry in the shade. [replacement] remove filter from the back of air filter. • dispose of the old filter as non flammable waste. Oner may result in electric shocks or fire.to avoid oxygen depletion, ensure that the room is adequately ventilated if equipment such as a burn. is used together with the air conditioner.before cleaning, be sure to stop unit operation, t. rn the breaker off or remove the power cord. otherw.
Comments are closed.