Diy Easy Access Raised Garden Bed 8 Easy Steps Raised Bed Garden
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Step 2: building the frame start assembling the frame of your raised garden bed. use the 2″x10″x15′ spf pine for the sides and the 2″x10″x3′ pieces for the ends. secure them together using your power drill and screws. step 3: adding support for additional support, use the 4″x4″x2′ cedar posts at each corner. Set screws. measure in 3 4 inches from each end of a 4 foot plank. use a drill with a phillips head bit to partially sink three screws into the broad side of each end of the plank, spaced evenly from the long edges (at approximately 3, 6 and 9 inches). repeat the process with the other 4 foot plank. if using reclaimed lumber or wood that is.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Here’s how to build a raised bed using a “no dig” method: mow the grass or weeds as close to the ground as possible. then, cover the area with cardboard, smothering the grass weeds, and eventually rot down into the soil. (make sure you pick off any tape and staples that won’t decompose.). A raised garden bed—essentially a large planting box—is the ultimate problem solver: it offers perfect drainage, protection from pests, and easy access to crops. and it’s just the thing to turn your backyard into the farm of your dreams. follow our directions, and you’ll be able to build the 4 by 8 foot bed pictured here as a weekend. A raised garden bed should be a minimum of six inches deep because the roots of your plants will need at least that much space to grow down. if you’re building your garden bed over concrete or stone, you’ll want to aim for at least 10 to 12 inches. and, keep in mind, the higher the raised bed, the easier it will be to access your garden!. Measure 4×4″ corner pieces. just as how 2×6″ boards are not truly 2 inches wide, they are also not really 6 inches tall. their actual dimensions are closer to 5 1 2 inches. so, three 2×6″ boards stacked on top of each other it actually creates a 16.5 inch raised bed, not an 18 inch tall bed.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
A raised garden bed should be a minimum of six inches deep because the roots of your plants will need at least that much space to grow down. if you’re building your garden bed over concrete or stone, you’ll want to aim for at least 10 to 12 inches. and, keep in mind, the higher the raised bed, the easier it will be to access your garden!. Measure 4×4″ corner pieces. just as how 2×6″ boards are not truly 2 inches wide, they are also not really 6 inches tall. their actual dimensions are closer to 5 1 2 inches. so, three 2×6″ boards stacked on top of each other it actually creates a 16.5 inch raised bed, not an 18 inch tall bed. Steps to building an 8’x4′ raised garden bed step 1 – assemble the bottom layer of bed. start by connecting the sides to the endcaps using screws, as shown in the diagram (side boards are on the inside of the endcaps). using wood glue and 3 screws, connect each cedar board to the 12” support piece. Drill and drill bit. 2 x 2×6 lumber (or 2×8 or 2×10 if they have it) exterior screws. 4 pieces of 2×4 or 4×4 to reinforce the corners of the bed. if you have the tools at home, you can cut your pieces of lumber in half. if not, you can ask them to cut your lumber for you at the home improvement store.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Steps to building an 8’x4′ raised garden bed step 1 – assemble the bottom layer of bed. start by connecting the sides to the endcaps using screws, as shown in the diagram (side boards are on the inside of the endcaps). using wood glue and 3 screws, connect each cedar board to the 12” support piece. Drill and drill bit. 2 x 2×6 lumber (or 2×8 or 2×10 if they have it) exterior screws. 4 pieces of 2×4 or 4×4 to reinforce the corners of the bed. if you have the tools at home, you can cut your pieces of lumber in half. if not, you can ask them to cut your lumber for you at the home improvement store.
Comments are closed.