Diy Vintage Crackled Paint Effect Painting Recipe Diyођ It’s important to only work in small sections. do not cover the whole piece at once. you want to go little by little, working in sections of maybe six inches at a time. 2. while it’s still wet and tacky, place a thick layer of paint directly over the glue. the thicker the paint, the bigger the cracks will be. Apply a base coat: start by applying a base coat of paint in the desired color. let it dry completely before moving on to the next step. the base coat will show through the cracks created by the crackle medium. apply the crackle medium: using a brush or a roller, apply an even layer of crackle medium over the dry base coat.
How To Do The Diy Crackle Paint Finish Technique With Glue And Paint Make sure you let this completely dry before moving on to the next step. now that your paint is all dry. next, brush on the white glue. you can apply this as thin or as thick as you’d like. the thinner you apply it, the smaller the crackle will be, the thicker you apply it, the larger the crackle will be. while the glue is still wet, you will. If you go over it again, it will not crackle and it will smudge. using a blow dryer on it at this point will speed up the drying process and help it crack even more. plus, it is fun to watch the magic happening. final step – use your topcoat of choice. i waxed mine and love the look!. Step 4: load your brush with a good amount of the top coat acrylic paint. apply it in even horizontal strokes over the tacky glue layer. you should have enough paint on your brush to be able to spread the paint over the glue in one stroke. tip: one pass over each section produces the best results. Apply a layer of craft glue over the base coat and let it dry half way, until it becomes tacky to the touch. apply the second color of acrylic paint over the glue layer. the paint will start to crackle as it dries. if desired, sand the surface lightly to enhance the crackle effect.
Comments are closed.