Dodge Ram Blend Door Actuator Calibration
![calibrate blend door actuator calibrate blend door actuator](https://ytimg.googleusercontent.com/vi/532BOHyQhzo/maxresdefault.jpg)
Calibrate Blend Door Actuator Blend door actuator recalibration. Ram year. 2016. engine. 6.4. i own a 2016 ram 3500 tradesmen 6.4, the heater core was replaced and with the heater box out the blend door actuators were replaced. full disclosure we attempted to get the timing of the position correct when we reassembled everything. once back together we performed the door calibration with alfa obd.
![dodge Ram Blend Door Actuator Calibration dodge Ram Blend Door Actuator Calibration](https://www.2carpros.com/images/articles/original/bend-door-actuator-4241.jpg)
Dodge Ram Blend Door Actuator Calibration Blend door actuator calibration climate control. The new dongle (thank you for the heads up on the alternate @jimmy07) came while i was away, so this morning i used it and was able to connect to the hvac module and successfully complete the blend door actuator calibration. i then went out and drove the truck for about 20 minutes. Step 1: insert the ignition key and turn it to the on position. then, hit the ‘auto’ button on the temperature control. turn your car off once the controller says auto on its display. step 2: next, go to the fuse box and pull out the fuse for the ac controller system or hvac actuator. Sometimes the actuators break on these things, but it is usually a broken blend, mode, or recirc door. it happens a lot and it is a very expensive fix if you take it to a mechanic. a lot of times they will replace the entire plenum box. i had the problem with my truck and i was quoted 1800 bucks to repair it.
Comments are closed.