Dsg Canusa Iep Dsg Canusa Ct G Series Heat Shrink Medium Voltage To add an external grounding kit for tape shielded cables add to the order number. to include a cable preparation kit add the suffix to the end of the order number. for example: a 15 kv outdoor termination for 2 0 cable with an external ground kit and cable preparation kit would be ct 151egp. ct g series product datasheet. The ct series heat shrink cable terminations rated 5 kv through 35 kv are designed for single and three core, non shielded, metal tape, drain wire shield, bare and jacketed concentric neutral and lc type shielded cables. the terminations use heat activated mastic seals that unequivocally bond to plastics and metal to provide excellent protection against moisture ingress. the electrical.
Dsg Canusa Ct G Terminations Youtube The ct 3x kits are for use with armour terminators or whenever a complete seal to the cable jacket is not required. the ct 3b series kits include a breakout boot and sealant to seal the termination to the 3 c cable jacket. confirm the cable dimensions. at the high end of the conductor range it may be necessary to select the next larger size kit. Training video: dsg canusa ct g terminations dsgcanusa. Test reports. the ct 080 series through ct 350 series terminations were tested to the requirements of ieee 48 1996 class 1 at an independent laboratory. test reports are available as follows: ct 080 series: hvs020075, ct 0150 series: hvs020076, ct 250 series: hvs020077 and hvs020083, ct 350 series: hvs020078. Fast, consistent installation means lower installed costs heat activated seals ensure maximum protection against moisture ingress. installation environment: use of torch adds flexibility to cable preparation in any. climate light weight construction requires no additional support. uv resistant, non tracking outer tube for long life, even under.
Comments are closed.