I created a set of easy modern diy planters in one weekend and with only three power tools! this is an awesome project for beginner woodworkers!can't wait to. These slim planter plans conceal two plastic flower boxes, in addition to a large hidden storage compartment beneath the plastic boxes, where you can store gardening tools. dimensions of 52.75.
Tools bernzomatic ts4000 miter saw drill 1 ½” forstner bit sander thick bristle brush paint brush. materials (3) 1 x 6 x 8′ cedar board (2) 2 x 2 x 8′ pressure treated board 2 ½” decking screws (2) magnetic cabinet latch outdoor timber oil planter plant. the steps: 1. set your miter saw to 5 degrees and begin cutting your cedar pieces. 1. modern diy small wood planter. anika's diy life. this small, modern diy planter uses cedar fence boards for the box and 2x2 and 1x2 boards for the leg frame. the legs' angled design gives it a. Product cost for diy planter boxes: 4 inch cedar boards (qty 2 @ $10.43) – $20.86. we ended up ripping an inch off of these to make 3 inch wide boards for the tops of the planters, that’s why you don’t see the 4 inch cedar boards used in the planter. 2×2 cedar square end baluster – (qty 4 @ $4.98) – $19.92. 10 minute diys: tiny tea tin planter. i made this cute tiny little planter out of an old loose leaf tea tin. they are so adorable, i couldn't bear to throw them all away. i just chucked the lid and painted them.
Product cost for diy planter boxes: 4 inch cedar boards (qty 2 @ $10.43) – $20.86. we ended up ripping an inch off of these to make 3 inch wide boards for the tops of the planters, that’s why you don’t see the 4 inch cedar boards used in the planter. 2×2 cedar square end baluster – (qty 4 @ $4.98) – $19.92. 10 minute diys: tiny tea tin planter. i made this cute tiny little planter out of an old loose leaf tea tin. they are so adorable, i couldn't bear to throw them all away. i just chucked the lid and painted them. Make a beautiful, long planter box that works great for decks and small areas with this diy planter box step by step guide. all you need are exterior rated wood glue, 1.25″ exterior screws, a hybrid wood protector, 1″ x 6″ x 96″ board, 1″ x 3″ x 96 board, large gravel pea gravel, and garden soil. Assembling the planter box is easy. simply butt one of the long pieces up against one of the side pieces and attach them together using 1 inch wood screws. tip: to avoid cracks in the wood, pre drill the screw holes. once the sides and lengths are attached and the four corners are connected, screw the bottom plank into the sides.
Make a beautiful, long planter box that works great for decks and small areas with this diy planter box step by step guide. all you need are exterior rated wood glue, 1.25″ exterior screws, a hybrid wood protector, 1″ x 6″ x 96″ board, 1″ x 3″ x 96 board, large gravel pea gravel, and garden soil. Assembling the planter box is easy. simply butt one of the long pieces up against one of the side pieces and attach them together using 1 inch wood screws. tip: to avoid cracks in the wood, pre drill the screw holes. once the sides and lengths are attached and the four corners are connected, screw the bottom plank into the sides.
Comments are closed.