Extra Clicks On 3 Way Lamp Socket Explained
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Most lamps with 3 way sockets have standard use bulbs and not 3 way bulbs. this leads to those extra clicks to turn on and off the light. 3 way bulbs are pri. The next time you return home from the flea market with a lamp under your arm, here's how to tell whether or not its socket can take a three way bulb. by bob vila updated on nov 19, 2015 11:11 pm est.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
These have multiple filaments to provide three levels of brightness (low, medium, high, off). when a normal bulb is used, you get the behavior that you described. when you have a three way incandescent bulb, it uses two different filaments, a low brightness one and a high brightness one. the switch has four positions to give three different. Ramsey hardware does many lamp repairs and the most common problem is customers bringing in a lamp that does not work correctly. the first thing to check extra clicks on 3 way lamp socket explained | ramsey hardware does many lamp repairs and the most common problem is customers bringing in a lamp that does not work correctly. Using a screwdriver or appropriate tool, carefully loosen the screws or nuts holding the old wiring in place. be gentle to avoid damaging the wires or the socket. once the screws are loosened, gently pull out the wires from the terminals. if the wiring is old or damaged, consider replacing it with a new set of wires. 3 way sockets. 3 way sockets have two contacts inside the socket and are made to burn 3 way bulbs. if you look at the bottom of the 3 way bulb there are two contact points on the bulb to match the contacts in the socket. 3 way bulbs have two filaments inside the glass. the 3 way socket allows the filaments to burn independently or in tandem.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Using a screwdriver or appropriate tool, carefully loosen the screws or nuts holding the old wiring in place. be gentle to avoid damaging the wires or the socket. once the screws are loosened, gently pull out the wires from the terminals. if the wiring is old or damaged, consider replacing it with a new set of wires. 3 way sockets. 3 way sockets have two contacts inside the socket and are made to burn 3 way bulbs. if you look at the bottom of the 3 way bulb there are two contact points on the bulb to match the contacts in the socket. 3 way bulbs have two filaments inside the glass. the 3 way socket allows the filaments to burn independently or in tandem. Lift the plug as far as the internal wire will allow from the bottom. to see the wire connections beneath, slide the metal container away from the base. separate the two wires by unscrewing the two wire connectors. remove the old assembly by twisting the switch base away from the threaded rod. onto the rod, insert the new three way switch unit. Trace the power cord to the outlet: follow the cord with your hand or visually trace it to the wall socket or power strip where it is plugged in. remove the plug: firmly grip the plug with your hand and gently pull it out from the outlet. make sure to keep a firm hold on the plug and avoid pulling on the cord itself.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Lift the plug as far as the internal wire will allow from the bottom. to see the wire connections beneath, slide the metal container away from the base. separate the two wires by unscrewing the two wire connectors. remove the old assembly by twisting the switch base away from the threaded rod. onto the rod, insert the new three way switch unit. Trace the power cord to the outlet: follow the cord with your hand or visually trace it to the wall socket or power strip where it is plugged in. remove the plug: firmly grip the plug with your hand and gently pull it out from the outlet. make sure to keep a firm hold on the plug and avoid pulling on the cord itself.
Comments are closed.