If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!! paypal.me aaronhinesauto?locale.x=en usfollow this c. Step 6 add new transmission fluid. in order to perform this task, pop the hood and remove the transmission fluid dipstick. next, use the funnel to distribute approximately 5 to 6 quarts of brand new transmission fluid. in order to test the new fluid, you will need to heat your transmission back up to operating temperature (approximately 150°).
For a modern transmission regardless of the miles km's on the clock i'm a big fan of doing a fluid flush on or in year 4 of the vehicle life. and then again at the next 4 years. example my 2016 ford explorer currently has 76k on the clock it is 3 years old (bought in 2015). I’ve seen a couple of higher mileage (150k ) or so trans filters cut open and there wasn’t much of anything in them. it’s a very robust filter with both a fine and course filter media. 2015 2020 ford f150 transmission fluid & filter 2018 5.0 in need of a transmission fluid and filter change. 2015 2020 ford f150 doing a "drop the pan" transmission fluid and filter change 2016 f150 2.7 ecoboost fx4 supercrew doing a drop the pan transmission fluid and filter change at 55k miles. i found a couple of references online (including amazon) that said ft188 fits, so ordered from amazon 2 months ago. (for. ***updated information: ford recommends checking the transmission fluid while the engine is running and the transmission fluid is at least warm, if not hot.
2015 2020 ford f150 doing a "drop the pan" transmission fluid and filter change 2016 f150 2.7 ecoboost fx4 supercrew doing a drop the pan transmission fluid and filter change at 55k miles. i found a couple of references online (including amazon) that said ft188 fits, so ordered from amazon 2 months ago. (for. ***updated information: ford recommends checking the transmission fluid while the engine is running and the transmission fluid is at least warm, if not hot. 2009 2014 f150 ford 6r80 6 speed transmission fluid and filter change i actually got allot of request for this video to be done and i think it turned out well. as it turned out many are unsure of the whole filter setup inside. i go over the fluid and filter change with all my tips along the way. Install . put the new filter in the trans, if the filter won't stay, you'll need to put it on the pan and kind of line it while putting the pan in place. now put the 8mm bolts in. if the pan doesn't seat all the way, your filter isn't in properly. tighten the 8mm, not overly tight since it's aluminum and they're tiny.
Comments are closed.