Diy Transmission Flush Ford F150 Ford stipulates it should be a drain and fill only. flushes are only if the transmission is being replaced. i've posted that you shouldn't flush the tranny unless you were having problems or replacing a hard component and people here acted like i was nutz. i'd only do a drain and fill. Basically disconnect the return side of the transmission cooler line, start up the truck and empty out the pan. remove the pan, clean and replace filter. once back together, fill up the pan and start up the truck again. do this one more time or until you see the color of the new fluid. connect you cooler line back up and fill up the pan.
Ford F150 Transmission Flush 2004 2008 ford f150 transmission fluid change or flush i have a 2004 heritage truck with 154000 miles 6 cylinder engine. is a transmission fluid change a better option than a flush? i'm not sure of the maintenance history on this vehicle regarding whether or not the tranny fluid has been changed before. Step 6 add new transmission fluid. in order to perform this task, pop the hood and remove the transmission fluid dipstick. next, use the funnel to distribute approximately 5 to 6 quarts of brand new transmission fluid. in order to test the new fluid, you will need to heat your transmission back up to operating temperature (approximately 150°). In this video, i demonstrate a complete transmission fluid exchange on this 2016 ford f150 utilizing the transmission's oil cooler return line and a 5 gallon. 2015 2020 f150 flush transmission or not 2018 3.5eb with 10 speed transmission. it has 60,000 miles. i was wanting to have new transmission fluid, bleed brakes and new differential fluid. my local shop, not ford, recommended a bg transmission flush for $300. i've done the transmission on my trucks for years but.
Comments are closed.