Carefully pry the gearshift cables from the gearshift levers. detach the gearshift and selector cables by pushing the abutment collar forward. cut the insulation and fold it to one side. remove the 2 cable bracket nuts and detach the cable bracket from the floor. to install, tighten to 9 nm (80 lb in). remove the gearshift cable assembly. Next cut away the carpet covering the shift cables. make sure you cut wide enough to get to the bolts that hold in the shift cables. then you can remove the shifter cables from the shifter base. pry them off the shift tower itself and then untwist the knobs holding them to the shifter base.
Shop wholesale priced oem ford focus shift cables at fordpartsgiant . all fit 2000 2018 ford focus and more. ford focus manual transmission double shifter. Apply the parking brake. release the lock tab on the selector cable. note: by placing the shift lever into 4th gear, it locks the small lever into the neutral position. move the gear shift lever into the 4th gear position. depress the lock tab on the selector cable, setting the cable adjustment to the small lever. transmission shifter mechanism. 1. put the shifter in neutral. 2. carefully pop pry up the orange lock on the back of the cable end. 3. wiggle the shifter around trying to find the best center position don't shift into a gear. 4. push in the orange lock on the back of the cable end. take it out for a test drive and see how all the gear gates feel. Checking the transmission fluid is the first step you should take in diagnosing a ford focus that won’t shift. misaligned throttle position sensors and malfunctioning shift solenoids are possible causes. diagnosing the issue and seeking proper repair can help ensure smooth operation. this issue usually requires a professional diagnosis.
Comments are closed.