Gas Cutting Set Inspection Checklist
![gas Cutting Set Inspection Checklist gas Cutting Set Inspection Checklist](https://globalehs.co.in/wp-content/uploads/2022/07/Gas-Cutting-Set-Safety-Inspection-Checklist-1024x1024.png)
Gas Cutting Set Inspection Checklist Check points for inspection of gas cutting set: sn. details. 1. cylinder should always be kept in trolley. 2. always keep cylinder in upright position and secured. 3. always ensure valve protection cap with it. This document is a checklist for inspecting a gas cutting set. it lists 10 items to check including [1] ensuring protective valve caps are firmly fixed on oxygen and acetylene cylinders, [2] checking that pressure gauges for both gases are working properly, and [3] verifying that flash back arrestors have been provided on hoses to prevent back fires. the checklist is to be completed by an hse.
![Solution gas cutting inspection checklist Studypool Solution gas cutting inspection checklist Studypool](https://sp-uploads.s3.amazonaws.com/uploads/services/3156159/20220213082618_6208c0aa0edfb_gas_cutting_inspection_checklist__blurred.jpeg)
Solution Gas Cutting Inspection Checklist Studypool To prepare checklist for the gas cutting cylinders set inspection, following are some main points: the cylinder should be kept in a trolley. always kept in the upright position. properly y secured. valve protection cap. the regulator should be free from any defect. the pressure gauge should be in proper condition. provide flashback arrestor. Check each step once completed: completed. inspect the torch handle and heating welding brazing nozzle thoroughly: inspection includes: check for damage on valves, fittings and seating areas; ensure both o‐ rings are intact and in place on cone end of nozzle; ensure torch is free from oil and grease; make sure nozzle is free from slag or. The document is a gas cutting set inspection checklist used to ensure safety. it contains 14 items to check on the gas cutting set including ensuring the cylinder is upright and secured, regulator and pressure gauge are in good condition, hoses are color coded and fitted properly, flash back arrestors are provided, proper ppe is used, the torch is in good condition, and only competent persons. The following points you must know while inspection of gas cutting set. 1) need to check protective valve cap provided for both cylinders or no, 2) need to check pressure gauges two for each cylinder are in working condition or no, 3) need to check flash back arrestors (fba) provided for acetylene & oxygen cylinders or no, 4) need to check non.
Gas Cutting Sett Checklist Pdf This document provides a checklist for inspecting a gas cutting set. the checklist includes 14 items to check such as ensuring the cylinder is upright and secured, the regulator and pressure gauge are in good condition, hoses are color coded and fitted properly, flash back arrestors are provided, proper ppe is used, the torch is in good condition, and first aid and fire equipment are available. 15. combustible, and flammable items present. 16. welding bay not clean origanized. 17. personal items like clothing, bags, food, etc. present. the templates available in our public library have been created by our customers and employees to help get you started using safetyculture's solutions. the templates are intended to be used as.
Comments are closed.