Go Power Ts 30 30 Amp Automatic Transfer Switch Overview

30 Amp Transfer Switch Go Power Product overview model: gp ts 30. the go power! transfer switch 30 amp (ts 30) provides automatic power switching between two separate 120 volt ac input sources. features: voltage: 120 vac; amps: 30 amps; dimensions: 9.65”l x 7.28”w x 4.75”h; weight: 3 lbs. Click the link to buy it now: amzn.to 31woz8ego power! ts 30 30 amp automatic transfer switch overviewcan handle 2 sources of 30 amps at one timemad.

Go Power Ts 30 30 Amp Automatic Transfer Switch Overview Youtube 2. connect the 30 amp branch circuit to 5 and 6. 3. connect the designated circuit panel to the output terminals. the inverter will only supply the load in the absence of the 50 amp power supply, in which case, only the load designated to the 30 amp branch circuit is supplied. the timer delay bypass switch on the ts 30 should be in the on position. Ts 30 wiring diagram . the ts 30 switches between two ac sources and only two sources. if three sources are on the rv, then two switches would be required. here are some examples of different ways to wire a ts 30 transfer switch. #1 ts #30 switching between shore power and generator #2 ts 30 between inverter and shore power. 1. introduction the go power! 30 amp transfer switch (ts 30) provides automatic power switching between two separate 120 volt ac input sources, including power cords, onboard generators, or onboard inverters. the ts 30 will sense the presence of available power supplies and automatically select the proper one. page 5 2. An automatic transfer switch is usually installed to allow both your inverter and shore power to alternatively feed the circuits and prevent ac back feed. the go power! gp ts 30 is a 30 amp ac switch that automatically connects shore power (when available) to your breaker panel. when unplugged from power, it then connects your inverter output.