How To Build Raised Garden Beds On A Hillside Garden Likes For easy access, raised beds are usually no more than 4 feet (1 m.) wide. set the rectangular frame on the ground where you want the finished bed to be located. use the level and shims to raise the downhill portion of the frame so the box sits level. cut legs from 2 by 4 inch (5 x 10 cm.) lumber for each corner of the box. Alignment – orient the length of the beds across the slope, not down the slope. this prevents erosion within the beds. level tops – each individual bed should have a flat, level soil surface. adapt bed heights as needed. stepped layout – “terrace” beds by having higher beds at the top of the slope and lower beds toward the bottom.
Hillside Raised Garden Garden Stairs Sloped Garden Sloped Insert the freshly cut boards under the staked raised bed. then secure the boards' corners with braces using wood screws. in the end, check the level of all sides of the bed and adjust if necessary. with wooden and metal raised beds, level the ground in advance and make sure your bed is not sloping or angled. 5: put in the vertical supports. in each corner of the box, stand up a 2×6 so that it touches the ground and extends at least 6 inches above the top of the box. nail the box onto these uprights. you also want to do this in the middle of the 8ft 2×6 as well for added support. In a level garden bed, watering will be easier. applying water on a slope means the top is more likely to dry out before the bottom of the slope does. you want your bed to have an even distribution of soil moisture, so a level bed is best for that. similarly, nutrients dissolved in the water will flow to the lowest point. How to water the raised garden beds on the slope. the best way to irrigate raised garden beds on a hill is, by far, with a drip irrigation system. when compared to other techniques, this approach can conserve up to 50% of water, giving the plant’s root zone constant moisture.
Comments are closed.