Here are some important factors to consider before you grab a shovel. location. ideally, a pond should get a good mixture of sun and shade, but you want to achieve this without getting too close. Step 2: mark the pond. place the preformed pond liner down in your chosen location. stake the outside edge of the pond with your marking stakes. use the leveling sand (or spray paint) to mark the outside edge of the pond liner, as well as, any tiers or shelves your pond liner has. remove the marking stakes.
Clear the area and outline the shape of the pond with spray paint or a rope. dig the pond to the desired depth, sloping the sides at a 45 degree angle, and line it with a polythene sheet. pour the concrete, add chicken wire mesh, and pour another layer. cover the pond with plastic sheets and let it cure for 3 days. This video walks through the process of building my pond. in the photo (below) you can see the white outline—done with baking flour—marking an 8 x 11 foot area. i next used a long electrical cord to plan the actual shape of the pond within these boundaries. come with instructions that will help you plan the water flow. In this blog post, we’ll provide you with a step by step guide for how to build a pond, so you can add a beautiful water feature to your own outdoor space. let’s dive in (pun intended) and start planning your perfect pond. quick overview. the process of building a pond can vary depending on the size and design you desire. 4. make the pond a minimum of 1.5 ft (0.46 m) deep. the depth of your pond depends on how you are planning to use it. to have aquatic plants and goldfish in the pond, approximately 1.5–2 ft (0.46–0.61 m) deep is adequate. for a koi pond, you will need a depth of at least 3 ft (0.91 m).
Comments are closed.