Unfold the epdm liner and fit it to match the shape of the pond. extend the liner onto the banks for a minimum one foot distance. install the underlayment first, followed by the pond liner. fold the corners inward and leave at least 12 inches over the side walls of the pond to secure it with a cap board or stone. First, place the koi in bags containing the pond water. let them acclimate for about 15 minutes. place the bags in the pond water and let the fish swim out. add just a few fish to the pond at a time, no more than five or six in the 5 to 6 inch size range. this lets your biological filters adapt to the koi.
1. fill the pond with a garden hose and dechlorinate the water. place the end of the hose in the bottom of the pond, then turn on the tap and let the pond fill to about 1–2 in (2.5–5.1 cm) below the rim. if you live in an area with non potable water, use a hose filter to purify the water as it comes out. Installing your pump and filtration system. step 1. place the pump at the bottom of the pond liner, and make sure the cord can reach an outlet. the pump and the filter should be on the same side of the pond. once you have the pump in place, put the cord underneath the flexible liner. Instead, when doing this step in how to build a koi pond. create a shelf around the edge of the pond for planting marginal aquatic plants. the shelf should be about 12 inches wide and 18 inches deep. depending on the size of your koi pond, you may be able to create multiple tiers. 5. Chapter 7: enjoying your koi pond. your koi pond is not just a beautiful addition to your property but also a source of relaxation and enjoyment. spend time by the pond, observing the koi, and appreciating the serene ambiance it creates. you can enjoy the beauty. creating a stunning koi pond is a fulfilling and artistic endeavor.
Comments are closed.