How To Check Your Car S Coolant System 1. park the car on a level surface. if the car is not level, for instance if it is parked on a hill, you cannot get a true reading of your coolant level. in fact, if you open up your radiator cap while parked on a hill it could cause coolant to pour out. [1] 2. make sure the engine is cool. Open your hood and locate your radiator and coolant reservoir. some older vehicles don’t include a reservoir, but most modern vehicles have a small tank for filling and checking the coolant level. the reservoir should be clear plastic, so you can easily see the level of coolant and the maximum fill line.
Maintenance Tips The Engine Coolant Level A1 Performance Auto Repair Test the coolant. set your multimeter to dc volts to less than (<) 20 volts. touch the black lead to the negative battery lead or the chassis ground, and place the red lead into the coolant. if the reading is less than .4 volts, the coolant is in good shape. anything over that indicates the anti corrosive properties of the antifreeze have. There are two places under your hood to check coolant level: the overflow tank (which some old cars may not have) and the radiator itself. if it’s not obvious, you can find the overflow tank by. Step 2: pop the hood and locate the radiator cap. open your car’s hood. almost all cars have their radiators located under the hood. once the hood is opened, look to the front of the engine bay. Make sure you find the right tank (adding antifreeze to the screen wash, brake fluid or power steering reservoir could cause damage). check your vehicle handbook to find the location of the coolant filler cap. 3. check the engine coolant level. the coolant should be between the min and max marks on the side of the expansion tank.
5 Signs You Need A Coolant System Check Keep Your Car Running Smoothly Step 2: pop the hood and locate the radiator cap. open your car’s hood. almost all cars have their radiators located under the hood. once the hood is opened, look to the front of the engine bay. Make sure you find the right tank (adding antifreeze to the screen wash, brake fluid or power steering reservoir could cause damage). check your vehicle handbook to find the location of the coolant filler cap. 3. check the engine coolant level. the coolant should be between the min and max marks on the side of the expansion tank. Pull over and shut off the vehicle. issues with the cooling system can also cause the engine to run cold. in that case, the temperature gauge will remain in the blue. 2. look for the check engine light. another early indicator of a problem with your cooling system may be the check engine light on your dashboard. In order to remove this air from the system, keep the ignition key in the on position for at least 10 minutes without starting your engine. after 10 minutes, switch off the ignition and wait for about 5 minutes to release any remaining pressure through the filler cap. 9. recheck coolant level.
How To Check Your Coolant Level Signs That A Car Is Leaking Coolant Pull over and shut off the vehicle. issues with the cooling system can also cause the engine to run cold. in that case, the temperature gauge will remain in the blue. 2. look for the check engine light. another early indicator of a problem with your cooling system may be the check engine light on your dashboard. In order to remove this air from the system, keep the ignition key in the on position for at least 10 minutes without starting your engine. after 10 minutes, switch off the ignition and wait for about 5 minutes to release any remaining pressure through the filler cap. 9. recheck coolant level.
Comments are closed.