How To Clean A Central Air Conditioner For Summer Regularly vacuum the front grilles, body and control panel with a soft dusting brush tool to remove loose dirt. if needed, wipe areas clean with a slightly damp cloth. check the foam filter. 10. replace the air filter and check the temperature. the final step i do when cleaning my ac involves replacing the indoor air filter and turning the system back on. i use cheap air filters inside in addition to my media filter, so this is a good time to check and replace that one.
How To Clean A Central Air Conditioner For Summer Use the vacuum and a rag to clean the blower’s fan blades. then tighten any loose mounting bolts and, if the fan motor has oil ports, put a few drops of lightweight oil or spray wd 40 into the ports for lubrication. mop up any excess water inside the unit, and then reassemble the condenser. Brush the fins and coils with a soft nylon brush and vacuum the debris. spray the foaming coil cleaner on the inside of the coil assembly. let the cleaner sit for 15 to 20 minutes. gently rinse. Locate and clean the coils. most window air conditioners will have two sets of coils: the evaporator coils in front (inside) and the condenser coils in the back (outside). brush away dirt from the coils with a soft brush or cloth. clean away any additional dirt with a spray bottle filled with slightly soapy water. Clean out the tray and drain. finish the interior clean of your window ac unit by emptying the drip tray and clearing the drain. to remove debris or dirty water from your tray, grab a wet dry.
How To Clean A Central Air Conditioner 12 Steps With Pictures Locate and clean the coils. most window air conditioners will have two sets of coils: the evaporator coils in front (inside) and the condenser coils in the back (outside). brush away dirt from the coils with a soft brush or cloth. clean away any additional dirt with a spray bottle filled with slightly soapy water. Clean out the tray and drain. finish the interior clean of your window ac unit by emptying the drip tray and clearing the drain. to remove debris or dirty water from your tray, grab a wet dry. 2. wash pollen and dust off of the condenser. rinse the condenser by spraying it with water from a garden hose. work the spray from the hose over all sides of the condenser unit. rinse from top to bottom, so that runoff from the top portion of the condenser does not stain the bottom portion. To remove stubborn grime, rinse with lukewarm water and dish soap, and allow the filter to dry completely before putting it back into the unit. 3. clear the coils and condenser. most air.
Comments are closed.