Gently catch your fish with a pond net and place them into the filled containers. if you have a lot of fish, spread them out amongst more than one container. if the cleaning will take more than a couple of hours, be sure to move your pond aerator into the tanks. don’t forget to cover the tanks to keep the fish from jumping out onto the ground. > if ph levels are off, consult a pond specialist at hoffman’s water x scapes for guidance. if you have pond fish, salinity should be between 0.06 & 0.1% > to reach a salinity of 0.06% to 0.1%, add ¾ cup of pond salt per 100 gallons of water. > do not use table salt, or salt that contains iodine.
Step 2: remove debris begin by removing any large debris such as leaves, twigs, branches and dead plants from the surface of your pond. it is also important to remove any excess algae. depending on the size of your pond, this process may require specialized tools such as a skimmer net or vacuum cleaner. Step 3: control algae, clean water. although algae commonly occur naturally, even in a healthy pond, it's important to control the algae growth to avoid water quality issues and sludge buildup. algae blooms occur when conditions are ideal for it to grow, allowing it to quickly take over your pond. luckily, you don't have to remove the water to. Stuff the straw into a mesh bag, hay net, or fishnet tights. allow the bag to sit in the pond for several weeks, preferably where the water spreads, such as a fountain or waterfall, if possible. after a few weeks, the barley will start to degrade. remove any rotting pieces to avoid adding more nutrients for the algae. First, remove any large debris floating on the surface of the water using a skimmer net. then, drain a portion of the pond to expose the liner. gently scrub the liner with a soft brush or a cloth to remove any stubborn algae or dirt. rinse the liner thoroughly with clean water, making sure to remove any soapy residue.
Stuff the straw into a mesh bag, hay net, or fishnet tights. allow the bag to sit in the pond for several weeks, preferably where the water spreads, such as a fountain or waterfall, if possible. after a few weeks, the barley will start to degrade. remove any rotting pieces to avoid adding more nutrients for the algae. First, remove any large debris floating on the surface of the water using a skimmer net. then, drain a portion of the pond to expose the liner. gently scrub the liner with a soft brush or a cloth to remove any stubborn algae or dirt. rinse the liner thoroughly with clean water, making sure to remove any soapy residue. Rinsing my pond filter with the hose. step 5: use hydrogen peroxide (h2o2): it takes a few weeks for the barley straw to work. so, to clear your pond water faster, use hydrogen peroxide (and no, it won’t kill your fish). pour it right next to the fountain or waterfall to disperse it. 4 – pressurized pond filter. with the pressurized pond filter, pond water is kept clean and clear. it’s a water tight circular canister that uses pressure to trap pond water inside, then filter it using sponges. in this case, the filter doesn’t need a lot of attention.
Rinsing my pond filter with the hose. step 5: use hydrogen peroxide (h2o2): it takes a few weeks for the barley straw to work. so, to clear your pond water faster, use hydrogen peroxide (and no, it won’t kill your fish). pour it right next to the fountain or waterfall to disperse it. 4 – pressurized pond filter. with the pressurized pond filter, pond water is kept clean and clear. it’s a water tight circular canister that uses pressure to trap pond water inside, then filter it using sponges. in this case, the filter doesn’t need a lot of attention.
Comments are closed.