How To Retrieve Clear Error Codes On Caterpillar Nissan Mitsubishiо How to clear error codes on a nissan mitsubishi or. 6. press and hold the accelerator for 10 seconds or more. doing so erases the results of the self diagnostic test, successfully clearing the forklift codes. only the current hour meter will be displayed on the dashboard; no codes should be present. 7. release the pedal and turn the key switch off. . 8.
How To Retrieve Clear Error Codes On Caterpillar Nissan Mitsubishiо Checking the trouble code history, write it down before clearing the codes. then check if the codes do not come back.stored errors are all cleared, active er. They are codes associated with the accelerator because with the pedal sensors malfunctioning, the vcm cannot be reset. there is an obd2 connector located on most of the trucks and it is located under the cup holder on the right side of the dash. 5. let the pedal rest for at least 10 seconds. 6. for 10 seconds or longer, press and hold the accelerator. by doing this, the forklift codes are successfully cleared and the findings of the self diagnostic test are deleted. on the dashboard, only the current hour meter will be visible; there shouldn’t be any codes. A complete table of error codes for the caterpillar nissan and mitsubishi forklifts.music: shawl paul norma rockwell i have more interesting videos about fo.
Comments are closed.