Learn the easy steps to sculpting a clay face. this tutorial is perfect for beginners who want to create realistic sculptures. explore the art of portrait sculpture and face anatomy. get inspired by human figures and drawing people. Keep the back of it flat. now, for the nose take a piece of clay about the size of a small grape. roll and knead to smooth and then roll in your palms you want the nose to be about 1 1 2'' long. set into place going by the picture. start pressing in on the sides. first with your fingertips.
1. form a ball. roll out an oval and smooth the clay. the smoother you can make your clay in the beginning, the easier it will be to form your face. depending on the size of your sculpture, it may be difficult to roll out a ball. if you're making a small sculpture, it shouldn't be a problem. Brush on mold: we are concerned that air bubbles may form in the intricate details on the base of the sculpture. also, brush on molds tend to have thick and thin spots – thin spots end up being weak points in the mold. poured blanket mold: one of the steps in the poured blanket mold process is to form a layer of clay on top of the original. Pick up the clay, set it back down, and again press and roll it toward you. repeat this process until the lump of clay is uniform in consistency (perhaps 50 times). 2. use the pinch method. probably the most ancient and easy way to mold clay is by pinching it with your fingers. To create a flat backed mold, press on the back of the clay in the mold with an acrylic block or anything hard and flat. 2. remove the cast from the mold. it may come out easily and without distortion or it may not depending on the shape of the mold, the stickiness and warmth of the clay used, etc.
Comments are closed.