Diy Bathroom Faucet Repair вђ Rispa Leaking shower faucet repair (single knob.) seals and steel ball. removal and reassembly, with my own tip. dont forget to turn off the main water line first!. Turn the knob on your water valve counter clockwise so the water will come back on. then, turn on the shower faucet to see if it works correctly. finally, turn off the shower and make sure the leak is gone. if your shower is still leaking, you’ll need to call a professional plumber to fix it. method 2.
Bathtub faucet Repair And Installation
Bathtub Faucet Repair And Installation Step 1: shut off the water. before you start any plumbing work, it’s crucial to shut off the water supply to avoid a flood. you’ll typically find the shut off valves for the shower in the basement, crawl space, or behind an access panel if you have one. step 2: remove the faucet handle. to remove the handle, look for a small cap or button. Remove shower cartridge. family handyman. pull off the stop tube. pry up the cartridge retaining clip with a small screwdriver or awl. remove the handle washer and then twist the cartridge stem loose and pull it out with pliers. if it’s stuck, use a special cartridge puller. unscrew the hex screw and hex nut until threads are visible. Step 1: detach the shower faucet handle. locate the screw securing your faucet handle; it might be hidden by a decorative cap that can be popped out with a flathead screwdriver. use a phillips screwdriver that fits the screw head and remove it. some handles might have more than one screw. Step 2 remove the cartridge. the cartridge is the piece of metal work you see sticking out of the exposed fixture. in a single handle shower faucet, you will likely see the hot and cold water shut offs on either side of this cartridge. they are small screws that can be tightened with a flat head screwdriver. there will be a nut or pin holding.