How To Hide Dash Cam Wires In 5 Minutes No Tools Required Step By Tuck wires along the headliner. with your route planned, grab your trim removal tool from and gently pry the edge of the headliner away from the car frame. carefully tuck the cable into the gap between the headliner and frame. plan route & tuck behind headliner. work your way from the dash cam towards the passenger side of your vehicle, tucking. Important: do not obstruct your airbags! alot of people dont realize how easy it really is to hide the dash cam wires or cables from inside your car. i show.
Diy Easy Way To Hide Your Dashcam Wire Perfectly Without Open A #diy #installdashcam #dashcaminstallation #dashcamhello, today i am gonna show you an easy way to hide your dashcam wiring, no more hanging wire in the middl. Step 2: connect the usb power cable to the dash cam. step 3: gently pull down the edge of the headliner and begin tucking the wire inside, moving towards the passenger side to avoid any obstruction while driving. step 4: use electrical tape or wire clips to secure the wire alongside the window, then direct it towards and beneath the dashboard. 1. use the headliner. the easiest way to hide your dashcam wire is to run it all along the headliner, down the weather sealing or the rubber stripping of the a pillar and then under the dashboard. i have seen some drivers preferring not to hide the cord under the weather sealing at the side of the vehicle. this is up to you. Common areas to access include the a pillar, headliner, and side panels. route the wires. carefully thread the dash cam wires along the planned route, tucking them behind the interior panels as you go. make sure the wires are secure when you’re doing this step. gently tug the wire to check if it’s placed firmly.
Comments are closed.