How To Install Metal Roofing Over Shingles Yes You Canо The batten installation is really the only component of the process that makes it different from a standard metal roof installation. 2. lay out metal panels and secure them to the battens. you may need a crew for this. haul the metal sheets up to the roof screw them to the battens or subroof to secure them in place. Here are the steps they will take: inspection: a thorough inspection of the roof deck and shingles is essential. the contractor will assess the condition of the shingles, identify any underlying issues, and ensure the structural integrity of the roof can support the additional weight of the metal. permitting: the contractor will secure any.
How To Put A Metal Roof Over Shingles Manmadediy Lay down and secure metal panels: start by installing metal panels at the roof’s eaves and work your way up, ensuring a panel overlap of at least 6 inches. once the panels are in place, secure. Step 1: remove the existing shingles. the first step is to remove the existing shingles from your roof. you can do this by using a hammer and pry bar. be careful not to damage the underlying roof deck. tip: if your roof is covered in asphalt shingles, you can rent a roof rake to make the removal process easier. Step 3: start putting the metal panels into place. you want to make sure to start straight and keep the edges straight. keep everything as square and symmetrical as possible. this also applies to running the screws in a straight line. you can place the screws on either the flat surface or the raised ridges on the roof. 3. secure the metal panels to the battens. depending on your metal roof type, the contractor will cut, place, and secure the metal panels to the battens or furring strips using exposed or hidden fasteners. 4. install the closure strips and flashing.
Comments are closed.