Today i am going to build a cable pulley system for the diy power rack! i am going to build an upper and lower cable machine so we can really optimize our wo. Diy home cable pulley machine (cable crossover, high pulley, low pulley system) ️ subscribe to the channel shreddeddad sub ️ follow me on.
⏬parts list ⏬ cheap swivel pulley block amzn.to 3x0h9kx more expensive climbing pulley (still cheap) amzn.to 3sklhuc wire rope clamps. The first thing you need to do is attach your tie down straps to your rack. then, you take your first carabiner and connect the strap to your pulley. repeat this process on the other side of your rack because in this case, two pulleys are better than one. from here, you thread your cable through your first pulley…. Simply screw together the flange and the straight pipe. next, screw on the tee so that the top has the two holes going across. make sure it fits and that you can loosen this piece again — this is how you’ll adjust the weights. feed one end of the cable through the top of the tee. once you have enough of the cable through the opposite end. First, we need to attach the two pulleys to the two wire rope cables, then put a thimble loop on each end of both pulley cables. let’s do it one at a time. thread one wire rope cable through one swivel pulley. the cable clamps should have a loop at the top and a screw on nut at the bottom.
Simply screw together the flange and the straight pipe. next, screw on the tee so that the top has the two holes going across. make sure it fits and that you can loosen this piece again — this is how you’ll adjust the weights. feed one end of the cable through the top of the tee. once you have enough of the cable through the opposite end. First, we need to attach the two pulleys to the two wire rope cables, then put a thimble loop on each end of both pulley cables. let’s do it one at a time. thread one wire rope cable through one swivel pulley. the cable clamps should have a loop at the top and a screw on nut at the bottom. The last thing you want is to have the carabiners, pulley or the cable fail when using it. make sure you have everything tightened and check the cable periodically for damage. item. qty. price. 1 4" galvanized stainless steel cable vinyl coated. 6.5 ft @ 7x19. 1. $10.99. Step one — ready the handle. begin by readying the cable pulley’s handle. for this, cut the galvanized wire into a 1 foot length to wrap it around your pvc or metal pipe thrice, and screw the untied end using a plier to secure the pipe. tie the loose ends into a loop using the plier.
The last thing you want is to have the carabiners, pulley or the cable fail when using it. make sure you have everything tightened and check the cable periodically for damage. item. qty. price. 1 4" galvanized stainless steel cable vinyl coated. 6.5 ft @ 7x19. 1. $10.99. Step one — ready the handle. begin by readying the cable pulley’s handle. for this, cut the galvanized wire into a 1 foot length to wrap it around your pvc or metal pipe thrice, and screw the untied end using a plier to secure the pipe. tie the loose ends into a loop using the plier.
Comments are closed.