How To Measure The Back Of Your Butt To The Back Of Your Knee Visual guide on how to measure the back of your knee to the floor to gather the right information for the most ideal office chair. E. seat height. make sure the user is in a seated position and the feet are flat on the floor. measure from the back of the person’s knees to the floor. ensure their typical footwear is considered. note:all measurements should be in mm. the individual should be seated, with a good upright posture and feet on the floor directly in front of them.
Ideal Measurements For An Ergonomic Chair R Officechairs A quick visual guide on how to measure the back of your butt to the back of your knee, in order to use these measurements for the correct ergonomic seating. B) your feet must be supported on the floor. (if you have shorter legs, consider using a foot stool.) c) your chair should not collide with the table top. 2. adjustable seat depth. when you sit right back into the chair (with your lower back supported), there should be a 2 3 finger gap between the edge of your seat and the back of your knee crease. With kneeling chairs, there should be enough room between the seat and the knee rest, and the knee rest and the floor, to allow for easy access and movement. 3. seat depth. you should be able to sit in a chair without pressure against the back of your knees, with your back properly supported by the backrest, and with adequate buttock and thigh. Stand in front of the chair. adjust the height so the highest point of the seat, (when in the horizontal position), is just below the knee cap. sit on the chair and keep your feet flat on the floor. check that the clearance between the front edge of the seat and the lower part of the legs (your calves) fits a clenched fist (about 5 cm or 2.
Comments are closed.