How To Paint An Rc Car Body A Step By Step Guide For Newbies Rc Lobby
![how To Paint An Rc Car Body A Step By Step Guide For Newbies Rc Lobby how To Paint An Rc Car Body A Step By Step Guide For Newbies Rc Lobby](https://rc-lobby.com/wp-content/uploads/2023/04/590b0911-aa21-4738-ba4f-572387c99d6f.jpg)
How To Paint An Rc Car Body A Step By Step Guide For Newbies Rc Lobby Priming the rc car body. priming is a crucial step in painting your rc car body. it helps the paint adhere to the body and prevents the color from bleeding through. to apply primer, i begin by sanding the body with a fine grit sandpaper. then, using a spray can or airbrush, i apply the primer to the body in thin, even coats. Prepping the body. take your car body to your sink and wash it with warm soapy water. this will remove any oil, dust, or other debris from the body. make sure you get all the soap off and dry it with a paper towel. you can also use a blow dryer if you want to get all the water off.
![How I paint My rc car body step by Step guide for Newbi How I paint My rc car body step by Step guide for Newbi](https://rc-lobby.com/wp-content/uploads/2023/04/cd3bdc58-71c6-4f45-ad46-62213e4d62f7.jpg)
How I Paint My Rc Car Body Step By Step Guide For Newbi The first step is to clean the surface thoroughly. this can be done using a mild dish soap and water. gently scrub the car body to remove dirt and oil, and then rinse to remove any soap residue. after cleaning, it’s time to scuff the surface. this helps in promoting better paint adhesion on the polycarbonate car body. Step 1: wash your body. wash and scrub the body with household dish soap and a paper towel to remove any residue left after molding. use warm soapy water in your sink, paying special attention to the tight curved areas and corners. dry the body with a clean towel or hair dryer. it must be completely dry before painting. Turn the hairdryer setting to "cool," position it 2–3 inches (5.1–7.6 cm) away from the rc body, and keep it moving at all times. 3. move on to another color after you have finished with the first. when the last coat is dry, remove the masking tape covering the area you plan to paint a different color. 4 easy steps to paint an rc car body: 1). start by cleaning the car body. start by cleaning any dirt and dust off the car body with a soft clean cloth or rag. this will create a strong base for your paint coat to stick to, so it will last longer and give your car that perfect finish. be sure to also pay special attention to any nooks or cracks.
Comments are closed.