How To Ping By Mac Address Ping Command Prompt So lets say i have a printer with a mac address of: 01 00 5e 7f ff fa. open your dos terminal and send this command. dos command: arp s 192.168.1.120 01 00 5e 7f ff fa. now try pinging 192.168.1.120 it will look for that device with that mac address we just assigned. On windows, the command is “ping a [mac address]” (without the quotes). on a mac, it’s “ping c 3 s 56 [mac address]” (without the quotes). the “ c 3” flag tells the ping command to send three packets, and the “ s 56” flag sets the packet size to 56 bytes. press enter and wait for the results.
How To Use The Ping Command In Windows Mac And Linux вђ Tony Teaches Arp is a command line tool that allows users to view and manage the address resolution protocol (arp) cache. in addition, arp provides information about the association between ip and mac addresses on a local network. here, we’ll first retrieve the associated ip address from the mac address and then ping by ip instead of mac. This command sends a series of icmp echo request messages to the specified host and displays the corresponding echo reply messages. pinging by ip address: typically, ping is associated with ip addresses. for instance: ping 192.168.1.1. in this example, the ping command tests the connectivity to the device with the ip address 192.168.1.1. @pacerier the arp command shows the contents of the address resolution protocol cache, which maps ip addresses to the hardware (mac) addresses . if you haven't contacted the target ip address, then it won't be in the cache. ping is a simple way to contact it to add it to the cache. you could use any network command, it's just ping is an easy one. To ping a mac address, you can use the command prompt on a windows computer. simply open the command prompt and type “ping” followed by the mac address you want to test. for example, “ping 00 1a 2b 3c 4d 5e”. press enter, and the command prompt will send a series of data packets to the specified mac address. #ad.
Comments are closed.