How To Hang A Curtain Rod With Command Hooks No Holes Or Tools 10 tips for hanging curtains with command hooks. you can use command hooks like you would command strips—that is, to attach items to a wall or other flat surface without drilling any holes. they’re just shaped differently, making them a better option for securing a curtain rod or pole. 1. surfaces where command hooks will work. Thank you so much for watching! please make sure you like, comment, and subscribe!products used ( in order)command large forever classic metal strips hooks,.
How To Hang A Curtain Rod Without Drilling Into The Wall Hang the hooks on the wall in your marked spots. press each hook into the wall for about 30 seconds. string your curtains onto your curtain rod and gently hang it up onto the hooks! ideally wait an hour if you want to give the hooks more time to adhere to the wall, but we were impatient and hung our rod right away with no problems. Command hooks in brushed nickel: amzn.to 3cwzfxbcurtain rod used: amzn.to 3rxzb9nheavy duty command strips: amzn.to 3ef3nd8curtain. Press the adhesive to the hook. remove the black liners and press each hook to the wall for ten seconds. slide the hook up and off the adhesive base and press the base an additional 30 seconds. allow to sit one hour before continuing. gently add curtains and curtain rods to the hooks. Prepare the hooks: separate the adhesive strips, remove the red liners, and press the adhesive to the back of each hook. install hooks: after removing the black liners from the adhesive, press each hook onto the marked spots on the wall for ten seconds. wait and set: slide the hook up and away from the adhesive base.
How To Put Up Curtain Rods With Command Strips Www Press the adhesive to the hook. remove the black liners and press each hook to the wall for ten seconds. slide the hook up and off the adhesive base and press the base an additional 30 seconds. allow to sit one hour before continuing. gently add curtains and curtain rods to the hooks. Prepare the hooks: separate the adhesive strips, remove the red liners, and press the adhesive to the back of each hook. install hooks: after removing the black liners from the adhesive, press each hook onto the marked spots on the wall for ten seconds. wait and set: slide the hook up and away from the adhesive base. Place the command hook against the wall where you want it to go, then trace the top, bottom, and side edges with a pencil. place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame. keep 2 hooks 3 to 6 inches (7.6 to 15.2 cm) outside the frame, and 1 hook in the middle to ensure central loading of the weight. [3] 4. Materials needed. here is what you will need to hang a curtain rod without drilling into the wall: 2 large command hooks – more on this below. curtain rod – to fit most command hooks, you will need a rod that has a diameter of 0.75″ or less. curtains – ideally, you want ones that are hung via rod pocket, back tabs, or rings.
Comments are closed.