How To Read Scale On Architectural Drawings Cassy Peoples вђ Boredmonday Learn how to use an architectural scale ruler so that you can read scaled drawings and blueprints. today's lesson walks you through how to read and use an ar. Metric scale 1:50. the two scales shown are 1:50 and 1:500. what they represent is the following; 1:50 means that when you measure 1 cm on the drawing it is equivalent to 50 cm of the real item to be built. 1:50 is also equivalent to 1 2 of meter for every cm on the drawings, because 100 cm is equal to a 1 meter.
How To Read Scale On Architectural Drawings Cassy Peoples 3. use the dimension scale where measurements are not provided. as a rule, architectural plans are drawn to a "scale". an example would be, 1 inch (2.5 cm) equals 10 feet (3 m) (1"=10'), so measuring between to walls on the plan sheet means for each inch, the distance is 10 feet (3.0 m). Architectural scales are expressed in ratios. in the real world, one meter is equal to one meter. this is considered a 1:1 scale. a drawing at a scale of 1:10 means that the object is 10 times smaller than in real life scale, 1:1. you could also say, 1 unit in the drawing is equal to 10 units in real life. When we know the scale of the drawing is correct, we can use a scale ruler. scale bar – these are shown on a drawing and represent a printed scale like the scale on a scale ruler. they immediately allow the reader to compare the scale within the drawing to a defined scale on the scale bar. the great thing about scale bars is they adjust. If your scale has 1 4 at one end of an edge and 1 8 at the other end, the row of numbers that starts with zero closer to the 1 4 are the numbers that correspond to that scale, with a 1 4 inch corresponding to one foot. if you then want to measure out a 4 foot wall at a particular scale, simply begin your line at zero and draw it to the “4.
Comments are closed.