How To Remove A Pop Up Tub Drain Plug Stopper Easy No Screw No Remove these tub drain stoppers may seem complicated at first. after watching this video you realize it can be done anytime. no tools needed. materials used:. How to remove 6 different kinds of drain stoppers.
How To Remove A Tub Drain Stopper No Tools Needed Youtube 💪 how to easily remove bathtub stopper! unclog drain under 1 minute! no tools needed! affiliate links support the channel and ongoing live giveaway 🙂 ️ ️. 1. check for a flip lever or a small hole in the stopper. so called “flip it” and “press flo” stoppers are both brand name bathtub drain stoppers that can be removed quickly and easily. these stoppers are fixed in place by an o ring that prevents them from slipping into the drain, and can simply be pulled out. 2. To do this, use a screwdriver to unscrew the screws holding the plate in place. once the plate is removed, you should be able to see the drain and the stopper mechanism. step 4: disconnect the linkage. if your drain stopper is connected to a linkage mechanism, you’ll need to disconnect it before removing the stopper. Adjust it, reinsert it and run water into the tub to test it. if it leaks out, lengthen the stopper linkage by turning the nut on the threaded rod to seal the drain better. if the drain doesn’t open to let the water out, shorten the stopper linkage by turning the nut in the opposite direction. tmb studio. step 6.
How To Remove Bathtub Drain Stopper That Spins Freely Youtube To do this, use a screwdriver to unscrew the screws holding the plate in place. once the plate is removed, you should be able to see the drain and the stopper mechanism. step 4: disconnect the linkage. if your drain stopper is connected to a linkage mechanism, you’ll need to disconnect it before removing the stopper. Adjust it, reinsert it and run water into the tub to test it. if it leaks out, lengthen the stopper linkage by turning the nut on the threaded rod to seal the drain better. if the drain doesn’t open to let the water out, shorten the stopper linkage by turning the nut in the opposite direction. tmb studio. step 6. Step 2. remove the knob on the top of the stopper. hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter clockwise. if the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob. step 3. Remove the stopper knob located on the top. hold the stopper shaft and twist the knob counterclockwise. if the knob resists, place the rag on top and grip it with the pliers. the insert in the stopper shaft unscrews with a flathead screwdriver. remove the strainer from the stopper.
Comments are closed.