Resolve Official Trailer Youtube Put a dab of dielectric grease (from a hardware store) on the contacts and insert the bulb. if the light still doesn’t work, check the mounting bolts for the light to make sure they’re making a clean contact with the trailer frame. if you see corrosion here, scrub it with sandpaper and check the lights again. step 6. Learn how to troubleshoot, fix or repair trailer wiring issues or problems.this video will show you how to diagnose and troubleshoot common issues what your.
How To Resolve Trailer Connection Issues Youtube Select a color of wire in the socket, and find the same one on the connector front. clip one end of the jumper wire to the connector pin, and clip the other to the continuity tester. probe the tester inside the socket. if your trailer lights are failing, trace the wire and check for breaks. Here are some steps to troubleshoot blown fuses: check for visible signs of damage, such as burned or melted wiring, loose connections, or damaged components. inspect the trailer’s electrical system, including the lights, brake controller, and any other components, for any signs of malfunction or damage. Method 4. method 5. using one turn signal engages the turn signals on both sides of the trailer. (hard wire only) vehicle has combined brake and turn signals, brake light wire on harness is not grounded. insufficient ground or short to ground on trailer or vehicle side. method 1. method 2. In this video we show where to start when diagnosing a non functioning trailer light. in many cases it is just a simple fuse! trailer wiring is an extension.
Comments are closed.