How To Test A Fan Capacitor Condenser Using A Digital Multime Now we are going to try this capacitor in very quickly and easy way using this digital multimeter, subscribe now, thanks. Now lets to measure how many volts has inside this capacitor when is charged, in this test using this digital multimeter. subscribe. thanks.
How To Test This Fan Capacitor Condenser Using A Digital Mult In this video, we show 3 methods on how to test a capacitor with a multimeter. the first method refers to the resistance test of the capacitor, the second is. 5. test the capacitor using a multimeter. now, it’s time to test! using the capacitance function: turn on your multimeter and set it to the capacitance function. check the capacitor’s label for its rated capacitance (e.g., 20uf means 20 microfarads). if it’s a dual run capacitor, it’ll have two ratings. for the condenser fan: place one. Set the multimeter knob to ohm (unit of resistance) or the greek letter omega (*), as shown in figure 1. connect the multimeter leads to the capacitor terminals again, ensuring that the red one is on the positive and the black one is on the negative. the first resistance reading that appears on display should be noted. 3. prepare the multimeter: set your multimeter to the appropriate capacitance measurement setting. if your multimeter doesn't have this setting, set it to measure resistance (ohm setting). 4. connect the probes: attach the red probe to the positive terminal and the black probe to the negative terminal of the capacitor.
How To Test This Fan Capacitor Condenser Using A Digital Mult Set the multimeter knob to ohm (unit of resistance) or the greek letter omega (*), as shown in figure 1. connect the multimeter leads to the capacitor terminals again, ensuring that the red one is on the positive and the black one is on the negative. the first resistance reading that appears on display should be noted. 3. prepare the multimeter: set your multimeter to the appropriate capacitance measurement setting. if your multimeter doesn't have this setting, set it to measure resistance (ohm setting). 4. connect the probes: attach the red probe to the positive terminal and the black probe to the negative terminal of the capacitor. Instructions on measuring capacitance. to safely discharge a capacitor: after power is removed, connect a 20,000 Ω, 5 watt resistor across the capacitor terminals for five seconds. use your multimeter to confirm the capacitor is fully discharged. use your digital multimeter (dmm) to ensure all power to the circuit is off. To test the condenser with a multimeter. connect the red probe with phase and black probe with the ground terminal of the condenser. the meter will give a reading. hold the probes for at least 15 to 20 sec. if the meter stills show resistance reading then the condenser is working properly. otherwise it is damaged.
Comments are closed.