Lay Landscape Fabric Over Compacted Stone Base Before Installing The

Lay Landscape Fabric Over Compacted Stone Base Before Installing The Determine your starting point and snap a chalkline; this is usually parallel with the home. use a folding square or the 3 4 5 method to snap a perpendicular line. if using a border paver, lay this first on the straight line, then lay the rest of the pavers. cut pavers as needed to fit within the space. Installation tips for using landscape fabric with gravel dig out area and level soil. before laying down landscape fabric, it is important to prepare the area properly. start by digging out the designated area and removing any weeds or grass. level the soil as much as possible to ensure a smooth and even surface for the fabric and gravel.

Can You Lay Landscape Fabric Over Rocks вђ Thriving Yard Before installing the fabric, make sure the ground is properly prepared by removing any vegetation and loose soil. next, spread a layer of gravel or crushed stone as a base for the pavers. then, lay the geotextile fabric over the gravel, ensuring it covers the entire area. finally, proceed with laying the patio pavers on top of the fabric. Step 4: compact the stone base. dampen the stone pack by spraying it lightly with a garden hose or watering can. then, use a 6 or 8 inch square hand tamper to pound the stone pack into a smooth, hard surface. dampening the crushed stone first keeps down dust and helps with compaction. step 5: lay down the landscape fabric. Remove any existing vegetation or debris from the area. use a shovel or a mini excavator to dig out the top layer of soil to the desired depth. aim for a depth of at least 6 8 inches to accommodate the base material and pavers. compact the excavated area using a plate compactor. Lay down landscaping fabric over the compacted subgrade. now spread your stone base material out evenly in a 2" layer. starting around the outer perimeter, use the plate compactor to pack together the base, overlapping each pass about 4" and working toward center. you should be making two complete passes for each layer. sand setting bed.