Earl S Ls0020erl Gm Ls Oil Cooler Block Off Plate With Port This video is completed on a 2004 chevy express 3500 6.0 lq4 but it applies to a pile of different vehicles as seen below. how to diy lq44.8 (293), 5.3 (325). Mar 2, 2020. #1. i've been chasing an oil leak from the oil cooler block off plate on my yukon's 6.2l ls based engine. i'm now on my second replacement gasket and it has started seeping again clearly between the block off plate and the oil pan. the first repair lasted about a year i used a thin bead of rtv that time.
Billet Aluminum Ls Block By Energy Mfg Borowski Race Engines The oil filter housing is a common leaking point for oil in late model gm trucks and suvs such as the silverado suburban or escalade. today we show you how t. Mid september i removed my bypass filter setup and reinstalled the stock oil cooler block off plate & bolts with felpro # 72435 gasket with a thin coat of rectorseal t 2 on the gasket. no leak. reactions: 89suburban , joseph garcia , geotrash and 2 others. Oil cooler block off plate leak. originally thought it was the pan but before i took it off, i replaced the block off plate gasket since that's where it's actually coming from upon further inspection. the 72435 fel pro gasket has changed in the last year or two since i sold parts. originally, you had the thick metal gasket with the rubber oval. 1068 posts · joined 2004. #1 · apr 28, 2012. i ran a dye through the motor oil and with a black light i can see it seeping out around the 2 10mm bolts and the 2 hex key bolts in the center of the plate on the driver side of the oil pan at the rear. i was worried it was the oil pan gasket, but i could not see any dye above the block off plate.
12611384 Genuine Gm Ls Oil Cooler Block Off Gasket Oil cooler block off plate leak. originally thought it was the pan but before i took it off, i replaced the block off plate gasket since that's where it's actually coming from upon further inspection. the 72435 fel pro gasket has changed in the last year or two since i sold parts. originally, you had the thick metal gasket with the rubber oval. 1068 posts · joined 2004. #1 · apr 28, 2012. i ran a dye through the motor oil and with a black light i can see it seeping out around the 2 10mm bolts and the 2 hex key bolts in the center of the plate on the driver side of the oil pan at the rear. i was worried it was the oil pan gasket, but i could not see any dye above the block off plate. When installing the new gasket, it helps to insert the bolts so that they protrude past the cooler housing by 1 4 in. or so that lets you 'hang' the gasket from them so that the gasket will be aligned properly. then push the bolts through and hand thread them to the block. (2) bolts are 10mm. I also checked ls1howto . since the plate and the oil pan is aluminum i am afraid of over tightening. position a new oil pan cover gasket (433) and the cover (434) to the oil pan and install the bolts (435). tighten the bolts to 9 y (80 lb in). thanks for the info. much appreciated.
.jpg "Install An oil cooler In The Cadillac Cts V")
Install An Oil Cooler In The Cadillac Cts V When installing the new gasket, it helps to insert the bolts so that they protrude past the cooler housing by 1 4 in. or so that lets you 'hang' the gasket from them so that the gasket will be aligned properly. then push the bolts through and hand thread them to the block. (2) bolts are 10mm. I also checked ls1howto . since the plate and the oil pan is aluminum i am afraid of over tightening. position a new oil pan cover gasket (433) and the cover (434) to the oil pan and install the bolts (435). tighten the bolts to 9 y (80 lb in). thanks for the info. much appreciated.
Zina Furrow
Comments are closed.