How to make a pen holder out of a plastic bottle, plastic bottle art #diycrafts #artandcraft 1. transform your workspace with our innovative diy guide on cre. Transform your old plastic bottles into a stylish pen holder with this easy diy tutorial. perfect for recycling and adding a creative touch to your desk deco.
Step 3: round: i made a round shape with thick thread. i used jute rope, you can also use thick knitting threads. i applied glue to the end of the thread and wrapped it around until it became a big round. while wrapping the rope, i applied glue in each row. the size of the round shape should be equal to the bottom of the plastic bottle. Welcome to my video on how to make pen holder from recycled bottle plastic. it is easy, durable and help contribute on reducing our waste by recycling our bo. Get a piece of felt paper, put hot glue, and wrap it around the plastic bottle. glue the excess felt paper on top to the inside of the plastic bottle. make four pieces of this. next, get cardboard in the shape of the supposed arrangement of the bottles (see picture below.) put hot glue around the edges and attached it to a piece of felt paper. Unroll about 1 inch (2.54 centimeters) of tape, and press it down on the bottle, right against the bottom edge. keeping the roll of tape close to the bottle, start winding the tape around the bottle. when you come back to where you started, overlap the tape by ½ inch (1.27 centimeters) and snip the tape off.
Get a piece of felt paper, put hot glue, and wrap it around the plastic bottle. glue the excess felt paper on top to the inside of the plastic bottle. make four pieces of this. next, get cardboard in the shape of the supposed arrangement of the bottles (see picture below.) put hot glue around the edges and attached it to a piece of felt paper. Unroll about 1 inch (2.54 centimeters) of tape, and press it down on the bottle, right against the bottom edge. keeping the roll of tape close to the bottle, start winding the tape around the bottle. when you come back to where you started, overlap the tape by ½ inch (1.27 centimeters) and snip the tape off. Instructions. cut a plastic bottle in half and discard the top end of the bottle. on the bottle, cut around the top of the bottle, every 1" from the top to around 1" from the bottom of the bottle, leaving the bottle in tact at the base. starting at the base of the bottle, glue the green yarn onto the bottle. Every few layers pushed down to tighten together. keep going around the bottle. switch colors as often as you want. once you get about a half inch from the top of the bottle, stop and tuck the end of the string down inside the bottle and through a couple of loops. tuck the tabs into the t shirt yarn to create an even top.
Instructions. cut a plastic bottle in half and discard the top end of the bottle. on the bottle, cut around the top of the bottle, every 1" from the top to around 1" from the bottom of the bottle, leaving the bottle in tact at the base. starting at the base of the bottle, glue the green yarn onto the bottle. Every few layers pushed down to tighten together. keep going around the bottle. switch colors as often as you want. once you get about a half inch from the top of the bottle, stop and tuck the end of the string down inside the bottle and through a couple of loops. tuck the tabs into the t shirt yarn to create an even top.
Comments are closed.