Onyx 16 Trimaran Kayak Trimaran 2 Project Instalation And Testing
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Kayak trimaran 2 project. instalation and testing Το Σάββατο κατασκευάστηκαν οι βάσεις και έγιναν οι τελευταίες ρυθμίσεις και τροποποιήσεις στα υλικά προκειμένου να ταιριάξουν στο σκάφος. Home made sailing kayak trimaran, the hardware was purchased through west marine stores and the raw materials were either local metal shop or mcmaster carr w.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Første test i skikkelig vind. toppfart på litt over 8knt og overraskende stabil og fin i vannet. men tørrdrakt er must. man blir våt i mye vind. men utrolig. Marinenow marinenow tandem sailing pedal kayak 2 person. When sailing downwind, the load is distributed more toward the bow. and you need some margin for waves and gusts. when you add all the volume that is only submerged part of the time, you get more than 100% for the total. ironically, one of the best choices for amas for a trimaran with a hobie 16 rig might be used hobie 16 hulls. That will be faster than a kayak with added sail alone, but still slower than a hobie 16, and possibly slower than a sunfish. a kayak's hull shape is optimised for lower speeds. also, you will need to be careful about how you contain the loads imposed by the rig, board and rudder, seeing that the hull is not designed to accept those.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
When sailing downwind, the load is distributed more toward the bow. and you need some margin for waves and gusts. when you add all the volume that is only submerged part of the time, you get more than 100% for the total. ironically, one of the best choices for amas for a trimaran with a hobie 16 rig might be used hobie 16 hulls. That will be faster than a kayak with added sail alone, but still slower than a hobie 16, and possibly slower than a sunfish. a kayak's hull shape is optimised for lower speeds. also, you will need to be careful about how you contain the loads imposed by the rig, board and rudder, seeing that the hull is not designed to accept those. It will make a perfectly good outrigger with a fairly low drag shape. 1x2 stringers, about 8 ft long would be good, about one foot on a side. cover with 8 or 10 oz canvas or polyester fabric (use rust proof stables) and seal it with polyurethane floor finish or oil based paint (5 to 7 coats). Tweet. #1. trika 540 small trimaran. 05 28 2013, 04:57 am. a new 17'4" 5.4m trimaran designed by klaus metz is car topable (32kg main hull weight) and stores compactly with folding crossbeams: 4'3" folded. the floats store in the boat. unstayed mast. naca foil dagerboard. simple stitch and glue construction.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
It will make a perfectly good outrigger with a fairly low drag shape. 1x2 stringers, about 8 ft long would be good, about one foot on a side. cover with 8 or 10 oz canvas or polyester fabric (use rust proof stables) and seal it with polyurethane floor finish or oil based paint (5 to 7 coats). Tweet. #1. trika 540 small trimaran. 05 28 2013, 04:57 am. a new 17'4" 5.4m trimaran designed by klaus metz is car topable (32kg main hull weight) and stores compactly with folding crossbeams: 4'3" folded. the floats store in the boat. unstayed mast. naca foil dagerboard. simple stitch and glue construction.
![](https://i0.wp.com/sicepat.com/images/image-not-found.png)
Comments are closed.