Diy Ponds Backyard Garden Landscaping Diy Patio Pond Outdoor Ponds Patio pond design and construction can transform an ordinary area to extraordinary! in another how to series from the pond digger learn tips, tricks and acti. In this video i make a patio pond with over head bog filter! hope you enjoy, and thanks for watching! 😊.
20 Above Ground Pond Ideas Kiddonames Active bog filter installation how to build. install an above ground patio pond with us step by step. learn what pond plants to select and how to plant them. Use a grinder and bevel the top inside edges of the cinder blocks or cover the edges with underlayment to soften the edges. then line the bog with 45 mil epdm pond liner allowing it to overlap the top of the walls. install the pump on the opposite side of the pond from where the bog filter is located. Aim for at least 6 hours of direct sunlight, although some plants can tolerate partial shade. accessibility: ensure easy access to the bog filter for maintenance tasks such as cleaning, replanting, and monitoring. a location with a clear path and sufficient space around the filter will simplify these tasks. 1. figure out the size and excavate. if you already have a pond in place and you want to add a bog filter, you’ll excavate the spot for it right next to the pond and make it a foot deep. if you’re adding a pond and a bog filter at the same time, dig out the pond and then the space for the filter system.
How To Build A Pond With Bog Filter Youtube Aim for at least 6 hours of direct sunlight, although some plants can tolerate partial shade. accessibility: ensure easy access to the bog filter for maintenance tasks such as cleaning, replanting, and monitoring. a location with a clear path and sufficient space around the filter will simplify these tasks. 1. figure out the size and excavate. if you already have a pond in place and you want to add a bog filter, you’ll excavate the spot for it right next to the pond and make it a foot deep. if you’re adding a pond and a bog filter at the same time, dig out the pond and then the space for the filter system. This means that the installation of a bog filter can be relatively easy. simply install a pond (please see our pond building guide for help on this) and that is most of the job complete. try to keep the depth of the bog filter pond to a maximum of 30cm (12 inches). you will then need a pump in your pond capable of circulating your pond roughly. The "construction" of the bog filter now consists of creating a mini pond to house the water diffusing system and the plants. start by designating a level area for the bog filter and construct a retaining wall out of landscaping rocks (this step is done right after liner installation). the area within the wall will become your bog filter.
Comments are closed.