Pin On Ktm Motorcycles
![pin By Nick Renner On motorcycle Random Supermoto ktm Supermoto ktm pin By Nick Renner On motorcycle Random Supermoto ktm Supermoto ktm](https://i.pinimg.com/originals/ea/97/ce/ea97ce397d3dd5f2f96df0ba99a79da6.jpg)
Pin By Nick Renner On Motorcycle Random Supermoto Ktm Supermoto Ktm Motorcycle models by european or american brands manufactured onwards of 2016 generally are obd2 compliant. models by japanese asian brands, and those made before 2016, usually are not obd2 compliant. however, some diagnostic scanners are still compatible with bikes that aren't obd2 equipped. but wait. Ktm plug adaptor for use with ktm motorbikes using the 6 pin diagnostic socket. this adaptor converts a standard 16 pin obd2 type plug to the ktm 6 pin plug for plugging into your ktm motorbike. some later model ktms (2019 ) may use the new eurov connection instead – please see here. always check your bike socket first to confirm or contact.
![pin On Ktm Motorcycles pin On Ktm Motorcycles](https://i.pinimg.com/originals/46/58/1d/46581da908fe36cee6114dc226223b1c.jpg)
Pin On Ktm Motorcycles With the app you can read all the ecu sensor outputs, just like on a car. you can read and clear codes. you can also do data logging and data graphing. to make the setup work you will need a cable to go from the ktm diagnostic port to the obd2 adapter. i used this one:. I bought a k line canbus to obd adapter cable that is supposed to be compatible with our bikes (amazon : otkefdi motorcycle 6 pin obd diagnostic cable for ktm kline and canbus motorbike: automotive) and have tried it with my old memoscan u381 that i use for car maintenance but it apparently can’t read some canbus protocols. The ktm interface includes a 6 pin adapter to adapt this cable to select ktm motorcycles, including the 990 lc8, 1190 rc8, 690 duke smc enduro supermoto and 1190 1290 models. ftdi based tool tested and proven to work with tune ecu!!!! the interface is intended to be used with tuneecu software. Good morning, i have a ktm sxf 250 motorcycle, with an aim taipan ecu. now i had a problem with the connector and i had to disassemble it, now i have a new connector and i wanted to reassemble it only i didn't find so much indication about the order of the wires, that is what should be connected to pin 1, pin 2 and continuing like that.
Comments are closed.