Perfect Pleating Tapes In 2020 Tapes Sewing Techniques Pleated Fabric Trim the tape about ½” from the end of your drapery panel, fold it under another ½”, and pin it in place. next, sew the pinned down pleater tape to the top hem with your sewing machine, following the stitch guides on the tape. again, make sure to back stitch at the beginning and the end to keep the stitches secure. This pleating tape can be sewn right over the pocket at the top or any tabs on the back of your store bought curtains. the soft pleats give window treatments a higher end look for sure. it's one of the biggest bangs for the buck i've done to customize them over the years:.
How To Make Pinch Pleat Curtains With Pleater Tape Ofs Maker S Mill In this video you will see a short tutorial of how to use the triple pinch pleat tape to make a pleated drapery heading. purchase at rowleydiy. How to sew curtains: learn how to use deep pleat tape and 4 prong hooks to easily make professional pinch pleated drapes without sewing the pleats. Step 3: hem the top of panel. i prepared the top of the curtain, where the pleat tape was going to go, by simply turning the raw edge down about ½ inch and stitching it in place. this just makes it easier to encase that raw edge before you begin to pin the pleat tape in place. To attach the pleater hook, insert each prong into separate pockets. you can also skip pockets to make the pleats deeper. this curtain panel will have 5 sets of pleats and 5 ½” in between with a couple of inches on each end. with the pleats it’s about 28” wide. mark where you want the tape to end with a pin and take out the hooks.
This Is How Pleated Fabrics Are Made Youtube Step 3: hem the top of panel. i prepared the top of the curtain, where the pleat tape was going to go, by simply turning the raw edge down about ½ inch and stitching it in place. this just makes it easier to encase that raw edge before you begin to pin the pleat tape in place. To attach the pleater hook, insert each prong into separate pockets. you can also skip pockets to make the pleats deeper. this curtain panel will have 5 sets of pleats and 5 ½” in between with a couple of inches on each end. with the pleats it’s about 28” wide. mark where you want the tape to end with a pin and take out the hooks. Instructions for diy pinch pleat drapes. the first step entails removing the tabs. if your drape doesn’t have tabs – great, you can skip to the next step. you have to remove the tabs because if you attach the pleat tape on top of it, it will create many thick layers and it will be impossible to fold to insert the hooks. Step 4: sewing the top panel and attaching the pleater tape to the curtain panel. before i ran the top panel through the sewing machine, i wanted to add the pleat tape. i pinned the pleat tape on the back of the curtain panel, centering it on the four inch panel i had just pinned. this part took a little more time.
Sewing Pleats 101 Instructions for diy pinch pleat drapes. the first step entails removing the tabs. if your drape doesn’t have tabs – great, you can skip to the next step. you have to remove the tabs because if you attach the pleat tape on top of it, it will create many thick layers and it will be impossible to fold to insert the hooks. Step 4: sewing the top panel and attaching the pleater tape to the curtain panel. before i ran the top panel through the sewing machine, i wanted to add the pleat tape. i pinned the pleat tape on the back of the curtain panel, centering it on the four inch panel i had just pinned. this part took a little more time.
How To Pleat Fabric вђ Paper Artist London Foldability
Comments are closed.